Kenwood KDC-MP445U Instruction Manual

Also see for KDC-MP445U: Service manual Quick start guide Quick start guide

Kenwood KDC-MP445U Instruction Manual Manual pdf 35 page image

English | 35Adding a voice dialing commandAdd a voice tag to the phonebook for voice dialing.You can register up to 35 voice tags.1 Enter Bluetooth modePress the [FNC] button for at least 1 second.“BT MODE” is displayed.2 Enter Function setting modePress the [FNC] button.3 Select Phonebook name edit modeThe item can be selected and determined asfollows.”Settings” ➜ “Voice Tag” ➜ “PB Name Edit”To select the item, turn the Control knob. Todetermine the item, press the [ENTER] button.4 Search for the name to registerTurn the Control knob to select name, and thenpress the [ENTER] button.If a voice tag has already been registered for aname, “*” is displayed before the name.5 Select a modeTurn the Control knob.Display Operation“Register” Register a voice tag.“Check”* Play a voice tag.“Delete”* Delete a voice tag.* Displayed only when a name for which a voice tag hasbeen registered is selected.Selecting “Register” (Regist)6 Register a voice tag (first)Press the [ENTER] button. When you hear abeep, speak the voice tag within 2 seconds.7 Confirm the voice tag (second)Press the [ENTER] button. When you hear abeep, speak the same voice tag again within 2seconds.“Completed” is displayed.8 Exit Function setting modePress the [ ] button for at least 1 second.Return to step 2. You can register another voice tagcontinuously.⁄• If your voice cannot be recognized, a message is displayed.(Refer to (page 41))Pressing the [ENTER] button allows you to retry voice input.Selecting “Check” (Play)6 Press the [ENTER] button.Play the registered voice and return to step 2.Selecting “Delete” (Delete)6 Delete a voice tagPress the [ENTER] button.7 Turn the Control knob to select “YES”, and thenpress the [ENTER] button.Exit Bluetooth modePress the [SRC] button.