4 | KDC-X494/ KDC-MP445U/ KMR-440UBasic OperationsBefore UsingExit Demonstration ModeTurn off the demonstration mode when you use itfor the first time after installation.1 Press the [ENTER] button to quit thedemonstration mode when the messages “ToCancel DEMO Press the ENTER Key” are displayed(approx. 15 seconds).2 Turn the Control knob to select “YES”, and thenpress the [ENTER] button.The demonstration mode can also be canceledin the Function setting mode. Refer to 36 DemoMode of (page 16).Adjusting the Clock & Date1 Press the [FNC] button to enter the Functionsetting mode.2 The item can be selected and determined asfollows.”Settings” ➜ “Clock & Date” ➜ “Clock Adjust”To select the item, turn the Control knob. Todetermine the item, press the [ENTER] button.3 Turn the Control knob to adjust the hour, andthen press the [ENTER] button.4 Turn the Control knob to adjust the minute, andthen press the [ENTER] button.5 Turn the Control knob to select “Date Adjust”, andthen press the [ENTER] button.6 Turn the Control knob to adjust the year, andthen press the [ENTER] button.7 Turn the Control knob to adjust the month, andthen press the [ENTER] button.8 Turn the Control knob to adjust the day, and thenpress the [ENTER] button.9 Turn the Control knob to select “Date Mode”, andthen press the [ENTER] button.10 Turn the Control knob to select Date format, andthen press the [ENTER] button.11 Press the [ ] button for at least 1 second toexit the Function setting mode.Common OperationPower and source selectionTurns the power ON by pressing the [SRC]button.When the power is ON, select a source.Press the [SRC] button and then turn the Controlknob. To determine the selected source, press the[ENTER] button.Tuner (“TUNER” or “HD RADIO”) ➜ USB (“USB”)or iPod (“iPod”) ➜ CD (“CD”) ➜ Auxiliary Input(“AUX”) ➜ Standby (“STANDBY”) ➜ Tuner(“TUNER”)Press the [SRC] button for at least 1 second toturn the power OFF.⁄• You can select the source selection mode to switchbetween sources each time you press the [SRC] button. Set28 Source Select Mode of (page 16) to “2”.• The source “iPod” and “CD” can be selected when eachsource is ready to play.• When an optional accessory is connected, the source namefor each device appears.• The power will be turned off automatically after about 20minutes have lapsed in standby mode. (KMR-440U only)VolumeTurn the Control knob to adjust the soundvolume.[FNC] [ENTER] [FAVORITE] [S.MODE] [AUDIO][0][SRC][ ][ ]ReleaseAuxiliary inputControlKnobUSB TerminalDisc slot
