Kenwood KDC-X8019BT Instruction Manual

Also see for KDC-X8019BT: Service manual Quick start guide

Contents

12 | KDC-X8019BT/ KDC-X8019BTLUSB device/ SD card OperationBasic OperationPlaying USB device• Connect a USB deviceWhen connected, the source is switchedautomatically and a song starts playing.• Select USB sourcePress the [SRC] button.Select the “USB” display.✍ SRC Select mode 2: Press the [SRC] button andthen turn the [VOL] knob. To determine theselected source, press the [VOL] knob.Playing SD card1 Press the Release button and drop open thefaceplate.2 Detach the faceplate.3 Hold the SD card with the label side up and thenotched section on the right, and insert it intothe slot until it clicks.SD card(commercially available)4 Attach the faceplate.5 Select SD sourcePress the [SRC] button.Select the “SD” display.✍ SRC Select mode 2: Press the [SRC] button andthen turn the [VOL] knob. To determine theselected source, press the [VOL] knob.Moving to the next folderPress the [PRESET] button for at least 1 second.Song SelectPress the [4] or [¢] button.Fast Forwards or Fast BackwardsHold down the [4] or [¢] button.⁄• No sound is output while playing audio file.Pause and PlayPress the [38] button to pause or resumeplayback.Remove USB deviceSelect a source other than Pandora and iPod, andthe iPod can be removed safely.Remove SD card1 Press the Release button and drop open thefaceplate.2 Detach the faceplate.3 Push the SD card until it clicks and then removeyour finger from the card.The card pops up so that you can pull it outwith your fingers.4 Attach the faceplate.SRC4MENU VOL¢38DISP PRESETiPod