Kenwood KDC-X8019BT Instruction Manual

Also see for KDC-X8019BT: Service manual Quick start guide

Contents

20 | KDC-X8019BT/ KDC-X8019BTLGetting Started of BluetoothEasy pairing function1 Enter easy pairing modePress the [ ] button for at least 1 second.Any of the following is displayed depending onBluetooth device registration condition:– “Searching”: When registering a Bluetooth devicefor the first time.– “(Bluetooth device name)”: When a Bluetoothdevice has already been registered.– “Device Full”: When maximum of five Bluetoothdevices have already been registered.When registering a Bluetooth device for thefirst time (Registering a Bluetooth device)2 “Searching” is displayed.Search for the Bluetooth device.When search is completed, “Finished” is displayed.3 Select a Bluetooth device nameTurn the [VOL] knob and press it when thedesired item is displayed.4 “Confirm Device” is displayed.If “Pairing Success” is displayed, proceed to step 7.If “PIN code is displayed, proceed to steps 5.If “*** NG” is displayed, press the volume knob.Proceed to steps 4.5 Input the PIN code1. Turn the [VOL] knob and press it when thedesired item is displayed.Select the digit.2. Turn the [VOL] knob to select the numbers,and then press the [VOL] knob.6 Transmit the PIN codePress the [VOL] knob for at least 1 second.If “Pairing Success” is displayed, registration iscompleted.When “Confirm Device” is displayed, confirmconnection with a Bluetooth device operation.7 The receiver is connected to a Bluetoothdevice, with “HF CONNECT” or “AUDIOCONNECT” displayed, and exits the easypairing mode.⁄• If an error code is displayed during paring, see Guide> (page 60).When a Bluetooth device has already beenregistered, or maximum of five Bluetoothdevices have already been registered/ selectinga Bluetooth device2 “(Bluetooth device name)” or “Device Full” isdisplayed.3 Select a Bluetooth device nameTurn the [VOL] knob.✍ To register a new Bluetooth device, select“Device Search”, then go to Bluetooth device for the first time>.4 Press the [VOL] knob.5 Select the profile for the device to connectTurn the [VOL] knob.✍ “HF” (HFP), “AUD” (A2DP), or “H&A” (HFP and A2DP)indicates the corresponding profile.6 Set up the Bluetooth device namePress the [VOL] knob.“✱H✱A (device name)”: The selected Bluetoothdevice is busy.“-H-A (device name)”: The selected Bluetoothdevice is on standby.“ “ (blank) (device name): The Bluetooth device isdeselected.✍ If a Bluetooth device is already selected, deselectit, and then select a different one.✍ “H” (HFP) or “A” (A2DP) indicates the correspondingprofile.7 Exit easy pairing modePress the [ ] button.Deleting the registered Bluetooth device2 “(Bluetooth device name)” or “Device Full” isdisplayed.3 Select a Bluetooth device nameTurn the [VOL] knob.4 Delete the selected Bluetooth devicePress the [VOL] knob for at least 2 seconds.SRC VOL