Kenwood KDC-X8019BT Instruction Manual

Also see for KDC-X8019BT: Service manual Quick start guide

Contents

English | 39When Speaker network is set to 3 wayDisplay Item Range“X’Over”“Tweeter” “FC” Tweeter High Pass Filter1, 1.6, 2.5, 4, 5, 6.3, 8, 10, 12.5 (kHz)“SLOPE” Tweeter Slope-6, -12 dB/Oct“GAIN” Tweeter Gain0, -1, -2, -3, -4, -5, -6, -7, -8 dB“PHASE” Tweeter PhaseReverse (180°)/ Normal (0°)“Mid HPF” “FC” Mid Range High Pass FilterThrough, 30, 40, 50, 60, 70, 80, 90,100, 120, 150, 180, 220, 250 (Hz)“SLOPE” Mid Range High Pass Slope-6, -12 dB/Oct“GAIN” Mid Range Gain0, -1, -2, -3, -4, -5, -6, -7, -8 dB“PHASE” Mid Range PhaseReverse (180°)/ Normal (0°)“Mid LPF” “FC” Mid Range Low Pass Filter1, 1.6, 2.5, 4, 5, 6.3, 8, 10, 12.5,Through (kHz)“SLOPE” Mid Range Slope-6, -12 dB/Oct“GAIN” Mid Range Gain0, -1, -2, -3, -4, -5, -6, -7, -8 dB“PHASE” Mid Range PhaseReverse (180°)/ Normal (0°)“Woofer” “FC” Woofer Low Pass Filter30, 40, 50, 60, 70, 80, 90, 100, 120,150, 180, 220, 250, Through (Hz)“SLOPE” Woofer Low Pass Slope-6, -12 dB/Oct“GAIN” Woofer Gain0, -1, -2, -3, -4, -5, -6, -7, -8 dB“PHASE” Woofer PhaseReverse (180°)/ Normal (0°)( : Factory setting)1 Select the sourcePressing the [SRC] button repeatedly switchessource.Select a source other than “STANDBY”.✍ SRC Select mode 2: Press the [SRC] button andthen turn the [VOL] knob. To determine theselected source, press the [VOL] knob.2 Enter Audio Control modePress the [VOL] knob.3 Enter X’Over setting modeTurn the [VOL] knob and press it when thedesired item is displayed.Select “Pro Setup” > “X’Over”.3 Enter Speaker setting modeTurn the [VOL] knob and press it when thedesired item is displayed.Select “Pro Setup” > “Speaker Setting”.4 Select the setting item to adjustTurn the [VOL] knob and press it when thedesired item is displayed.5 Make a settingTurn the [VOL] knob to select a setting value,and then press the [VOL] knob.6 Exit Audio Control modePress the [MENU] button for at least 1 second.X’Over SettingFine adjusting the following setting valuescorresponding to the X’Over values set in thesection (page 38).Display Item Range“X’Over”“Front” “FC” Front High Pass FilterThrough, 30, 40, 50, 60, 70, 80, 90,100, 120, 150, 180, 220, 250 (Hz)“SLOPE” Front High Pass Slope-6, -12, -18, -24 dB/Oct“GAIN” Front Gain0, -1, -2, -3, -4, -5, -6, -7, -8 dB“Rear” “FC” Rear High Pass FilterThrough, 30, 40, 50, 60, 70, 80, 90,100, 120, 150, 180, 220, 250 (Hz)“SLOPE” Rear High Pass Slope-6, -12, -18, -24 dB/Oct“GAIN” Rear Gain0, -1, -2, -3, -4, -5, -6, -7, -8 dB“SubWoofer” “FC” Subwoofer Low Pass Filter30, 40, 50, 60, 70, 80, 90, 100, 120,150, 180, 220, 250, Through (Hz)“SLOPE” Subwoofer Slope-6, -12, -18, -24 dB/Oct“GAIN” Subwoofer Gain0, -1, -2, -3, -4, -5, -6, -7, -8 dB“PHASE” Subwoofer PhaseReverse (180°)/ Normal (0°)“Tweeter” “FC” Tweeter High Pass Filter1, 1.6, 2.5, 4, 5, 6.3, 8, 10, 12.5 (kHz)“TWVolume”Tweeter Volume0, -1, -2, -3, -4, -5, -6, -7, -8 dB( : Factory setting)Next page 3