English | 55About USB device• When the USB device is connected to this unit,it can be charged up provided that this unit ispowered.• Install the USB device in the place where it will notprevent you from driving your vehicle properly.• You cannot connect a USB device via a USB hub andMulti Card Reader.• Take backups of the audio files used with this unit.The files can be erased depending on the operatingconditions of the USB device.We shall have no compensation for any damagearising out of erasure of the stored data.• No USB device comes with this unit. You need topurchase a commercially available USB device.• When connecting the USB device, usage of theCA-U1EX (option) is recommended.Normal playback is not guaranteed when a cableother than the USB compatible cable is used.Connecting a cable whose total length is longerthan 5 m can result in abnormal playback.About “KENWOOD Music Editor”• This unit supports the PC application “KENWOODMusic Editor Light ver1.1” or later.• When you use the audio file with databaseinformation added by the “KENWOOD Music EditorLight ver1.1”, you can search a file by title, album orartist name using the Search> (page 13).• In the Instruction manual, the term “Music Editormedia” is used to mean the device that containsaudio files with database information added withKENWOOD Music Editor.• “KENWOOD Music Editor Light ver1.1” is availablefrom the following web site:www.kenwood.com/cs/ce/• For further information on “KENWOOD MusicEditor Light ver1.1”, refer to the site above or theapplication help.About the Cell-Phone/ Bluetooth AudioplayerThis unit conforms to the following Bluetoothspecifications:Version Bluetooth Standard Ver. 3.0Profile HFP (Hands Free Profile)HSP (Headset Profile)SPP (Serial Port Profile)PBAP (Phone Book Access Profile)OPP (Object Push Profile)A2DP (Advanced Audio Distribution Profile)AVRCP (Audio/Video Remote Control Profile)For the cell-phones verified for compatibility, accessthe following URL:http://www.kenwood.com/cs/ce/bt/⁄• The units supporting the Bluetooth function have beencertified for conformity with the Bluetooth Standardfollowing the procedure prescribed by BluetoothSIG. However, it may be impossible for such units tocommunicate with your cell-phone depending on its type.• HFP is a profile used to make a hands-free call.• OPP is a profile used to transfer data such as a phone bookbetween units.• A2DP is a profile designed to transfer the music from anaudio player.• AVRCP is a profile designed to control playback andselection of music by an audio player.The marking of products using lasersCLASS 1LASER PRODUCTThe label is attached to the chassis/case and saysthat the component uses laser beams that have beenclassified as Class 1. It means that the unit is utilizinglaser beams that are of a weaker class. There is nodanger of hazardous radiation outside the unit.• The “AAC” logo is a trademark of Dolby Laboratories.• The Bluetooth word mark and logos are owned bythe Bluetooth SIG, Inc. and any use of such marksby JVC KENWOOD Corporation is under license.Other trademarks and trade names are those of theirrespective owners.• iTunes is a trademark of Apple Inc.• “Made for iPod” and “Made for iPhone” mean that anelectronic accessory has been designed to connectspecifically to iPod, or iPhone, respectively, andhas been certified by the developer to meet Appleperformance standards. Apple is not responsible forthe operation of this device or its compliance withsafety and regulatory standards. Please note that theuse of this accessory with iPod, or iPhone may affectwireless performance.• iPhone, iPod, iPod classic, iPod nano, and iPod touchare trademarks of Apple Inc., registered in the U.S. andother countries.
