46 | KDC-X8019BT/ KDC-X8019BTLBluetooth Setup5 Transmit the PIN codePress the [VOL] knob.If “Pairing Success” is displayed, registration iscompleted.✍ If the error message appears even though thePIN code is correct, try Bluetooth device>.6 Return to the device listPress the [MENU] button.7 Exit BT Settings modePress the [ ] button.⁄• This unit allows up to eight digits to be input for a PINcode. If a PIN code cannot be input from this unit, it canbe input from the Bluetooth device.• If there are 5 or more Bluetooth devices registered, youcannot register a new Bluetooth device.Registering Special Bluetooth deviceAllow registration of a special device that cannot beregistered normally (pairing).1. Select Special device registration modeTurn the [VOL] knob and press it when thedesired item is displayed.Select “BT Settings” > “Pairing” > “SPCL DVCSelect”.2. Enter Special device registration modePress the [VOL] knob.A list is displayed.3. Select a device nameTurn the [VOL] knob and push the center whenthe desired device name is displayed.If “Completed” is displayed, registration iscompleted.4. Go through the procedure step 3 of and completethe registration (pairing).Cancelling Special device registration modePress the [MENU] button for at least 1 second.⁄• If the device name is not in the list, select “Other Phones”.Registering PIN CodeBy operating the Bluetooth device, specify the PINcode necessary for registering this unit.1 Enter Bluetooth modePress the [ ] button.✍ You can also select from “Settings” in Menu Listmode.2 Enter PIN code edit modeTurn the [VOL] knob and press it when thedesired item is displayed.Select “BT Settings” > “Detailed Setup” > “PINCode Edit”.The current setting of PIN code is displayed.3 Input the PIN code1. Turn the [VOL] knob and press it when thedesired item is displayed.Select the digit.2. Turn the [VOL] knob to select the numbers,and then press the [VOL] knob.4 Register a PIN codePress the [VOL] knob.If “Completed” is displayed, registration iscompleted.5 Exit BT Settings modePress the [ ] button.⁄• By default, “0000” is specified.• A PIN code can be specified with up to eight digits.
