Kenwood KRF-V8881 D Instruction Manual

Contents

To control the system components in "Room A" from "RoomB", it is first required to set the IR RECEIVER to "Room B".After this, perform the IR RECEIVER setup using the mainunit keys as described in "Switching the IR RECEIVER mode",Then, perform the required setups for the remote controlunit using its "Setup Multi Room" menu as described below.After the "Room B" operation has been set, the audio for"Room B" is output from the speakers connected to theSPEAKERS B terminals and from the speakers of the poweramplifier connected to the PREOUT jacks.VR_2OgOIVR-2080/KRF-V88 B 1OiKRF V777 ! D (En,/KID Se/ect the "Main Menu" icon from the fixed segments.[ Lstn ;Mode TSndTFnc[S t p=]• The menu screen shown in step [] is displayed when [he "Stp"icon s selected from the "Main Menu"Perform icon selection in the "Setup" menu.O Select the "Multi Room" icon in the "Setup" menu.Download Multi RoomBackPerform setup.Zone SelectDISPLAY MODE• To control the des] red com-ponents from anotherroom, be sure [o set [heremote control unit to the"Room B" control modeO Setup of the remote control unit,Multi Room : Yes/No.................. Select "Yes" to use the system in both"Room A" and "Room B".Zone Select : Room A/Room B.................. Set according to your current location................... Select "Room A" if you are located in Room A................... Select "Room B" if you are located in Room B,• While "Multi Room" is set to "Yes", pa_rt of the system contmoperation, wMch is a "SL16" function, is not avaiiableI_ Setup of the main unit,Press and hold the DISPLAY MODE key for more than 2seconds to set the IR RECEIVER setup to "IR RECEIVER B',I To cor_trol components from "Room B"....See the description of "Remote control of audio in anotherroom {Room B}" ls When "Zone Select" is set _o "Room B", only the "Setup" menucan be selected from the "Main Menu" screens,