Kenwood KRF-V8881 D Instruction Manual

Contents

D Operation in the "Custom # Edit: VCR" screen._r (_'m__Q _JL_(_ Pwr : PowerJ@lm ®l P,v P,ayChannel Code JQ_L_!• The output tmingof each code can be switched as shown below"- -" ndicates that nO code is output and "Os" indicates that thecode is output at the same time es a macro e×ecute key _s pressed• The component name after "Edit: ....... " is switched to "VCR"_"DSS', "Cable", "Satellite", "LD", "DVD", "CD", "MD" or"Tape" according to the selected input.VR-2OgOiVR-_O80! KRF-V8881 O/KIqF V7 771D IEn/K]• Check the opecation after setting the time, If macro piay does notoccur, increase the tree settings with the following procedureO Set the "Pwr" (Power) on time,Select with the "_ "or "1_ " icon,• Select the "Pwr" icon and check operation.Set the "Ply" (Play) start time.Select with the "_ "or "[_1" icon.• Select the "Ply" icon and check operat on.O Set the "input Select" code output timing of the VCR.Select with the "_ "or "(_ " icon.• Seect the "Input Select" con and check operationQ Open the "10key Pad" menu screen to select a channe!.Select "Channel" icon.• Set as described in step []O Set the "Channel Code" output timing of the VCR.Select with the "_ "or "(_ " icon.• Se;ect the "Channel Code" icon and check Operation.D Operation in the "lOkey Pad (Macro)" screen.CIr :ClearEntr:Enter:The number of inputicons is shown in max.10 digits.Clr : Select to clear all the input "_k"Entr : Select when it is required to enter a value selection.>12 : Select when inputting a channel value of 13 or more.-/-- : Select to switch between the 1-dlgit input or 2-digitinput.• To output a set channel code, se(ect the "Channel Code" icon instep lei.O Set a channel.(Example)To set CH 11 : Select the "÷10 _ then "1" icons.O Select the " @ " icon to establish the selection.When " _ " is selected, the screen returns to the previousmenu.k" 'tCustom 1 Edit 1: ACCr_ Perform selection in the "Macro Edit: 1,2 or 3" menu screen,Custom[ _ Set the "Accessories" (power) ON timing.Select with the "[_ "or "_ " icon.)Custom 1 Edit 1 : TVD Pertorm selection in the "Macro Edit: Custom 1, 2 or 3" menu screen.Pwr : Power• Check the operation after setting the time, If macro play does notoccult, increase the time settings with the following procedure.0 Set the "Pwr" (power) ON time,Select with the "_ "or "(_ " icon.• Select the "Pwr" icon and check operation.Pwr :Setting of the TV's "Pwr" code output timing.TV :Selection of the controlled TV from "TV1" and"TV2".Video Select :Selection of the TV's "Video Select" code outputtiming.TV Select :Selection of the TV's "TV Select" code outputtiming._) Select whether "TVt" or "TV2" is to be controlled._) Set the "Video Select" code output timing.Select with the "(_ "or "[_" icon.• Select the "Video Select" icon and check operat=on.Q Set the "TV Select" code output timing.Select with the " _ "or "1_" icon.• Seect the "TV Select" icon and check operation.