Kenwood KRF-V8881 D Instruction Manual

Contents

I Preparation• Select the "Tuner" input.! n Select the "Tuner" icon.[] Perform operation in the "Tuner" menu screen.0 Select the receiving band.Seiect the "Band" icon.0 Select a station or frequency,Select the "(_ "or "(_" icon,Select the "Memory/lOkey Pad".[] Perform operation in the "Memory/lOkey Pad"menu screen.0 Select "Memory" icon.• The memory mode " _" and preset call mode "_"are sw tched alternatefy every time the icon is selected.I_ Select one of the preset numbers from 1 to 40,Select numeric icons as follows..,To preset in "t5". ........ _ []• Repeat steps Q,[] for each of the stations to be stored in memory,• If a station is stored in a preset number which has already storeda station memory under it, the prewous memory is replaced by thenew memory content.Operation in the "Memory/lOkey Pad" menu screenmmL_i[ _ H z,] t_lJ [ l] .'_,--...1.,i-.=_-'r_0 Select the preset number (up to 40) of the desired presetstation,Select numeric icons as follows.,,To receive in "20" , ...... _ ['_• If you make a mistake in entering the fi_;ure of t0, select thecon repeatedly until the original display is shown, then enter thecorrect nureberin orderOperation in the Tuner menu screen 0 Select the "(_ "or "_" icon of "P.CalI".When "_" icons are selected ....f ]D1_02_03 ...... 38--39_40When "_" icons are selected ....f01_02_03 ...... 38_39_40• Every time the icen is se eeted, the next stat on in the order of thepreset number is received,If the icon is bed selected _ Preset stations wil be received suc-cessively for about half a secondeach.