1-36 (No.RA018)(2) Test signalingAnalog mode signalingP25 Phase1 signalingP25 Phase2 signalingNXDN Mode signalingRAN: Radio Access NumberPN9: Pseudo-Random PatternNo.7, 9 Item: PC test mode only4.3 Panel Tuning Mode4.3.1 Transceiver tuning (To enter tuning mode)To enter tuning mode, press the [ ] key while the transceiveris in test mode. Use the [ ] key to write tuning data through tun-ing modes, and the [ ]/[ ] key to adjust tuning requirements(1 to 4096 appears on the LCD).Use the [ ] key to select the adjustment item through tuningmodes. Use the [ ] key to adjust 5, 9 or 17 reference level ad-justments, and use the [ ] key to switch between Wide/Narrow.• LCD display in panel tuning modeNo. RX TX1 None None2 None Square Wave3 LTR Data LTR Data4 QT:67.0Hz QT:67.0Hz5 QT:151.4Hz QT:151.4Hz6 QT:210.7Hz QT:210.7Hz7 QT:254.1Hz QT:254.1Hz8 DQT:D023N DQT:D023N9 DQT:D754I DQT:D754I10 DTMF Decode(CODE: 159D)DTMF Encode(CODE: 159D)11 None DTMF Encode (CODE: 9)12 2-tone Decode(A: 304.7Hz, B: 3106.0Hz)2-tone Encode (A: 304.7Hz,B: 3106.0Hz)13 Single Tone Decode(979.9Hz)Single Tone Encode(979.9Hz)14 None Single Tone Encode(1000Hz)15 None MSK PN916 MSK Decode MSK EncodeNo. RX TX1 NAC 293 NAC 2932 NAC 023 NAC 0233 NAC 5EA NAC 5EA4 None PN95 NAC 293 Symbol Rate Pattern6 NAC 293 1/3 Deviation Pattern7 NAC 293 0 Continuous Pattern8 NAC 293 Fidelity Pattern9 None FSW+PN910 NAC 293 1011Hz Tone Test Pattern11 Tone Pattern 1011Hz Tone Test Pattern12 Silence Pattern Silence Pattern13 Audio Test Pattern NAC293 + Audio Test Pat-tern14 Vocoder Loop NoneNo. RX TX1 STTP-OB-1031-0 STTP-IB1031-1+Audio2 None PN9 Phase23 STTP-OB-1031-1 Symbol Rate PatternPhase24 STTP-OB-1031-1 1/3 Deviation PatternPhase25 STTP-OB-1031-1 0 Continuous Pattern6 STTP-OB-1031-1 0 Burst Pattern7 STTP-OB-1031 SymmetricalSTTP-IB1031-18 Tone Pattern (Half rate) STTP-IB1031-19 Silence Pattern(Half Rate)STP-IB-1 +Silence Pattern (Half Rate)10 Audio Test Pattern(Half Rate)STTP-IB1031-1 + AudioTest Pattern (Half Rate)11 Codec Loop STTP-IB1031-1 + CodecLoop12 Vocoder Loop(Half Rate)STTP-IB1031-1 +Vocoder Loop (Half Rate)No. RX TX1 RAN1 RAN12 None PN93 RAN1 Maximum DeviationPattern7 FSW + PN9 FSW + PN99 Tone Pattern (1031Hz) Tone Pattern (1031Hz)No. RX TXAn RAST 2562.6CV voltage, AD value, etcSub LCD displayLow1Adjustment pointMain LCD displayAdjustment value(1~4096)Proper value guide(When the frequencyadjustment is necessary,or is displayed.)Adjustment itemAn: Analog narrow modeAs: Analog wide 4k mode *1Aw: Analog wide modeP1: P25 Phase1 modeP2: P25 Phase2 modeNn: NXDN narrow modeNv: NXDN very narrow modeLow1Low2Low3Center1Center2Center3High1High2High3*1: Wide 4k is displayed only when the PC test mode is used. However, it aimsat production for factory, or a operation verification of the transceiver. It is notnecessary in operation of the transceiver to adjust.
