1-76 (No.RA018)4.Mediumtransmitpower(Batteryvoltage :7.5V)1) Adj item:[An M_PWR]Adjust:[****]2) Adj item:[Low1]→[Low3]→[Center2]→[High1]→[High3]Adjust:[****]PTT : ONPress [ ] key tostore the adjust-ment value.1) Adj item:[Medium TransmitPower]2) Adj item:[Low1]→[Low3]→[Center2]→[High1]→[High3]Press [Transmit]button.Press [Apply All]button to store theadjustment value.PowermeterAmmeterPanel ANT Panel [Pan-el tun-ingmode][],[][PCtestmode][←],[→]5.0WNote:Medium transmit pow-er is the purpose ofthe custom power(adjustment).This power must belower than High trans-mit power.In the production, thisMedium transmit pow-er is adjusted at 5.0W.±0.1W2.3A or less[PC testmode]Press [ApplyAll] button tostore theadjustmentvalue after alladjustmentpoints havebeen adjusted.5.Lowtransmitpower(Batteryvoltage :7.5V)1) Adj item:[An L_PWR]Adjust:[****]2) Adj item:[Low1]→[Low3]→[Center2]→[High1]→[High3]Adjust:[****]PTT : ONPress [ ] key tostore the adjust-ment value.1) Adj item:[Low TransmitPower]2) Adj item:[Low1]→[Low3]→[Center2]→[High1]→[High3]Press [Transmit]button.Press [Apply All]button to store theadjustment value.PowermeterAmmeterPanel ANT Panel [Pan-el tun-ingmode][],[][PCtestmode][←],[→]1.0W ±0.1W1.2A or less[PC testmode]Press [ApplyAll] button tostore theadjustmentvalue after alladjustmentpoints havebeen adjusted.6.Balance*11) Adj item:[An BAL]Adjust:[****]Deviation meterLPF: 3kHzHPF: OFF2) Adj item:[Low1]→[Low3]→[Center2]→[High1]→[High3]Adjust:[****]PTT : ONPress [ ] key tostore the adjust-ment value.1) Adj item:[Balance]Deviation meterLPF: 3kHzHPF: OFF2) Adj item:[Low1]→[Low3]→[Center2]→[High1]→[High3]Press [Transmit]button.Press [Apply All]button to store theadjustment value.Devia-tionmeterOscillo-scopePanel ANT Panel [Pan-el tun-ingmode][],[][PCtestmode][←],[→]The Deviation of 20Hzfrequency is fixed.Change the 2kHz ad-justment value to be-come the samedeviation of 20Hz withinthe specified range.(a supplementaryexplanation:Another way to adjust isready.(Same as TK-5210, theold model of NX-5200).Press [AUX(Orange)]key to switch the tone to100Hz square wave.Then, make the demod-ulation waveform shownon oscilloscope intosquare shape.)2kHz Tone de-viation is with-in ± 1.0% of20Hz tone de-viation.[PC testmode]Press [ApplyAll] button tostore theadjustmentvalue after alladjustmentpoints havebeen adjusted.*1 : Refer to the “4.19.1 Necessary Deviation adjustment item for each signaling and mode” table.Balance adjustment is common with the adjustment of all signaling deviations.Item Condition Measurement Adjustment Specifica-tions/RemarksPanel tuningmodePC test mode Test-equip-mentUnit Ter-minalUnit Parts Method
