Kenwood TK-5210G Service Manual

Also see for TK-5210: Specifications Instruction manual Specifications Instruction manual Service manual

TK-5210 (G)41. ModesUser modePanel test mode *1 Panel tuning mode *1Data programming modePC test mode PC tuning modeClone mode *1Self programming mode *1Firmware version information *1Clock adjustment mode *1Transceiver information mode *1PC modeFirmwareprogramming modeMode FunctionUser mode For normal use.Panel test mode *1 Used by the dealer to check the fundamen-tal characteristics.Panel tuning mode*1 Used by the dealer to tune the transceiver.PC mode Used for communication between the trans-ceiver and PC.Data programmingmodeUsed to read and write frequency data andother features to and from the transceiver.PC test modeUsed to check the transceiver using the PC.This feature is included in the FPU.See panel tuning.FirmwareprogrammingmodeUsed when changing the main program ofthe fl ash memory.Clone mode *1 Used to transfer programming data fromone transceiver to another.Self programmingmode *1Frequency, signaling and features write tothe transceiver.Firmware versioninformation *1Used to confirm the internal firmware ver-sion.Clock adjustmentmode *1 Used by the dealer to adjust date and time.Transceiverinformation mode*1Used to confirm the transceiver firmwareversion.*1: K2, K3 and K7 models only2. How to Enter Each ModeMode OperationUser mode Power ONPanel test mode *2Press and hold the [Side3] and [PTT] keyswhile turning the transceiver power ON andthen release the [PTT] key first.PC mode Received commands from PC.Panel tuning mode*2 Press the [Side3] key, in Panel test mode.FirmwareprogrammingmodePress and hold the [Side3] and [PTT] keyswhile turning the transceiver power ON andthen release the [Side3] key first.Clone mode *2Press and hold the [Side2] and [PTT] keyswhile turning the transceiver power ON andthen release the [Side2] key first.Self programmingmode *2Press and hold the [Side2] and [PTT] keyswhile turning the transceiver power ON andthen release the [PTT] key first.And the “INPUT PASSWORD” is displayed,then release the [Side2] key.Firmware versioninformation *2Press and hold the [Side3] key while turningthe transceiver power ON.Clock adjustmentmode *2Press and hold the [Orange] and [PTT] keyswhile turning the transceiver power ON andthen release the [Orange] key first.Transceiverinformation mode*2Press and hold the [Side1] and [PTT] keyswhile turning the transceiver power ON andthen release the [PTT] key first.*2: K2, K3 and K7 models only3. Panel Test Mode(K2, K3 and K7 models only)Setting method refer to ADJUSTMENT.4. Panel Tuning Mode(K2, K3 and K7 models only)Setting method refer to ADJUSTMENT.REALIGNMENT