Kenwood TK-5210G Service Manual

Also see for TK-5210: Specifications Instruction manual Specifications Instruction manual Service manual

TK-5210 (G)9REALIGNMENT• Self programming mode flow chartTX NAC[A]RX NAC[A]TX signaling[A][A]RX signaling[A][A] [A][A][A]TX frequencyRX frequency[A][A]Zone/Channel[A]Read authorization password entry (6 digits)[A][Side2] + [PTT] + POWER ON Release [PTT][TX frequency] : Other than “OFF”[Channel type] : “MIXED”[TX frequency] : Other than “OFF”[Channel type] : “ANALOG” or “MIXED”[TX mode] : “ANALOG”[TX frequency] : “OFF”[Squelch type] : not “NAC”[TX frequency] : Other than “OFF”[Channel type] : “P25” or “MIXED”If [Channel type] is set to “MIXED”, [TX mode] must be set to “P25”.[Channel type] : “ANALOG” or “MIXED”[A][Channel type] : “P25”[TX frequency] : “OFF”[Channel type] : “ANALOG” “MIXED”[TX frequency] : “OFF”[Channel type] : “MIXED”[A][TX frequency] : “OFF”[Channel type] : “ANALOG”[A][Channel type] : “ANALOG”[A][TX frequency] : “OFF”Squelch type : “NAC” *1or[TX frequency] : Other than “OFF”[Channel type] : “MIXED”[TX mode] : “ANALOG”Squelch type : “NAC” *1*1 The squelch type can not be set using the self-programming mode.[A]Talkgroup ID List Amount : 0[Channel type] : “MIXED”[Channel type] : “P25” or “MIXED”Talkgroup ID List Amount must not be 0.Self programming modeInput PasswordOFF QTOFFZone selectionP25Channel selectionTalkgroup list number[A][A][A]KEEP THIS CHANGE?[A] or [D][Side 3][B]DQT N[B][B]DQT I[B][B] [B] [B][B]ANALOGChannel type[C]/[D]P25ANALOGTX mode[C]/[D]Channel spacing 12.5kHz25.0kHz[C]/[D][C]/[D]MIXED[C]/[D]OFF QT DQT N[B]DQT I