Kenwood TK-5210G Service Manual

Also see for TK-5210: Specifications Instruction manual Specifications Instruction manual Service manual

TK-5210 (G)8REALIGNMENTKey operationItemKeyZone-ChannelRXFrequencyTXFrequency Channel Type TX Mode ChannelSpacing RX Signaling TX Signaling[A] Go to the next item[B] Zone/Channelswitching2.5kHz/5kHz/6.25kHz/7.5kHz/1MHzstep switchingUnused QT/DQT(N)/DQT(I)/OFFswitching[C] Zone/Channeldown 1 step down ANALOG/P25/MIXEDswitching (Back)ANALOG/P25switching (Back)Channel spacingswitching (Back) Signaling down[D] Zone/Channelup 1 step up ANALOG/P25/MIXEDswitching (Forward)ANALOG/P25switching (Forward)Channel spacingswitching (Forward) Signaling up[Side3] Unused Unused ON/OFFswitching Unused 1 step/StandardswitchingKeypad[0]~[9](K3 model only)Unused Go to the direct enter mode Unused Go to the direct enter mode(After selecting signaling type)ItemKey RX NAC TX NAC TG List No.[A] Go to the next item[B] Delete the least digit from the current number (Press and hold to delete all numbers.) Unused[C] Unused TG List number down[D] Determine the least digit TG List number up[Side2] Increment a number in the specified digit Unused[Side3] Decrement a number in the specified digit UnusedKeypad(K3 model only)Add a digit to the current numberHow to enter the “A” ~ “F” is follows.A: Press [2] with PTT B: Press [5] with PTT C: Press [8] with PTTD: Press [0] with PTT E: Press [#] with PTT F: Press [*] with PTTUnused• Direct enter modeItemKey RX Frequency TX Frequency RX Signaling RX Signaling[A] Return to non-direct enter mode[B] Unused Change the type of signaling and return to non-direct enter mode[C] Unused[D] Delete the least digit from the current number (Press and hold to delete all numbers.)[Side3] ON/OFF switching at TX Frequency UnusedKeypad[0]~[9] Add a digit to the current numberKeypad[*] Return to non-direct enter modeKeypad[#] Delete the least digit from the current number (Press and hold to delete all numbers.)