Kenwood TKR-750-850 Function Reference

Also see for TKR-750: Brochure & specs Service manual Service manual Service manual Instruction manual

Contents

4 CHANNEL INFORMATION10 Function Reference (FUNC) Version: 1.01 USA# When QT Encode and the QT Reverse Burst function areenabled, TKR-750/850/751/851 transmits the QT Reverse Burstcode at end of transmission.# When the DQT Encode is selected, TKR-750/850/751/851transmits the QT Turn-off Code at end of transmission.! Configuration of KPG-91D" Configuring the QT/DQT Encode (Refer to FPRG6.2.4 QT/DQT Encode.)4.5 Channel NameYou can assign 2 digit characters to each channel name.The configured channel name appears on the Channel/Status display. (Refer to 1.6 Display.)! Configuration of KPG-91D" Configuring a Channel Name (Refer to FPRG6.2.5 Channel Name.)4.6 Wide/ NarrowYou can choice a transmission bandwidth. The valuedepends on the area or your license. (Refer to 1.4Bandwidth.)! Configuration of KPG-91D" Configuring the frequency bandwidth (Refer toFPRG 6.2.6 Wide/ Narrow.)4.7 Encode Tone in MultipleThis function allows you to wait calls with maximum 16different QT/DQT codes by setting additional 15 QT/DQT(Current) as well as the QT/DQT code (Primary) set on aeach channel. You can set a Main code and a Sub codein a Multi table. (Refer to 21 Multi-table.)TKR-750/850/751/851 encodes QT/DQT Encode codematching QT/DQT Decode in primary and current QT/DQT codes while it operates under Repeat Mode orDuplex Mode.Note: You cannot use Multi Table while the TKR-750/850/751/851operates under Simplex Mode. (Refer to 4.8 OperationMode.)If TKR-750/850/751/851 receives a transmission requestfrom Local Mic PTT or external PTT except SimplexMode, it automatically selects the signalling code totransmit. (The operation of repeat PTT switch isexcluded.)The encode operation varies depending on the PTT type.