Kenwood TKR-750-850 Function Reference

Also see for TKR-750: Brochure & specs Service manual Service manual Service manual Instruction manual

Contents

20 FUNCTION PORT51 Function Reference (FUNC) Version: 1.01 USANote:# It is possible to configure any voltage value to detect the voltagedecrease/increase. (*1) (Refer to 10.2 Power Supply LowerLevel, 10.3 RX Signal Detect (Below).)# It is possible to configure “Power Down Detect” adjustment ofPC Tuning mode to Hi Power and Low Power. This functionnotifies a user that the transmission power is suddenlydecreased. However, you cannot use this function as a real-timepower monitor. (*2) (Refer to 24.2.3 PC Tuning Mode.)Default: Hi (25 W) power: Approximately 10 W: Low (1 W) power: Approximately 0.3 W# When configuring the Activation code to the PF [COR] outputport or the PF [TOR] output port, TKR-750/850/751/851 cannotactivate the repeat operation since it transmits the code while itis in Busy status, so that it cannot receive the Air Remote code.(Refer to 18.2.3 Aux Output Activation.)# Since the status of the Air Remote Encode function is retainedwhile transmitting using the Repeater PTT, the Local Mic PTT, orthe External PTT, or CW ID, TKR-750/850/751/851 cannottransmit the Activation code even when the function is activatedwhile the Activation code is configured to the PF [Power SupplyLower Limit] output port. In this case, TKR-750/850/751/851transmits the Activation code after ending the transmission (thefunction deactivates). When the Deactivation code is configuredto the port, TKR-750/850/751/851 transmits the Deactivationcode after transmitting the Activation code. (Refer to 18.2.3 AuxOutput Activation, 18.2.4 Aux Output Deactivation.)! Configuration of KPG-91D" Configuring the Auxiliary Output ports (Refer toFPRG 6.10.2 “AUX” tab.)20.3.1 Logic TypeYou can select an Auxiliary Output port output logic type(High/Low) when the function is assigned to the AuxiliaryOutput port.• When the Active Low is selected:When the Auxiliary Output port is enabled, the voltagelevel becomes Low.• When the Active High is selected:When the Auxiliary Output port is enabled, the voltagelevel becomes High.! Configuration of KPG-91D" Configuring the Logic Type (Refer to FPRG 6.10.2“AUX” tab.)RX Unlock The PF [RX Unlock] output port become active when RX PLL is unlocked.The PF [RX Unlock] output port become inactive when RX PLL is locked.Selectable You can toggle the PF [Selectable] output port between Active and Inactive when the signal is applied toan Auxiliary Input port or a PF key.TORThe PF [TOR] output port become active when a signalling code is matched while receiving a signal.The PF [TOR] output port become inactive when a signalling code is not matched.The PF [TOR] output port become active on the channel which a signalling is disabled by QT/DQTDecode Disable function while receiving a signal.The PF [TOR] output port is disabled when TKR-750/850/751/851 is not receiving the signal.TXS The PF [TXS] output port become active while transmitting.The PF [TXS] output port become inactive when TKR-750/850/751/851 is not transmitting.TX Unlock The PF [TX Unlock] output port become active when the TX PLL is unlocked.The PF [TX Unlock] output port become inactive when the TX PLL is locked.Function Name Description