11Chapter One : Connecting Your DevicesConnectionsConnecting Your Cable TV or Satellite Tuner, continuedDo not plug in the receiver or devices to AC power untilyou have connected all your devices.This section focuses on the connections from your cable orsatellite tuner to the VR-4900/VR-4700/KRF-V9993D. Pleaserefer to your tuner’s instructions for more detail about itsconnection jacks and capabilities.The instructions in this section show one of several pos-sible variations on connecting your tuner. For further assis-tance on optional configurations, contact your cable or sat-ellite provider.To Connect a Cable TV Tuner with aComposite (RCA) Video Output:1. Review the information under “Before You Begin” onpage␣ 1. It contains important notes about the types ofvideo connections you can make.2. Connect the audio and video cables from the cabletuner’s Audio and Video Out jacks to the receiver’sVIDEO2, VIDEO3, or VIDEO4 PLAY IN jacks as shownto the left.3. Go to “Noting Your Devices” on page␣ 3 and note whichjack you used to connect your tuner. In addition, notethe brand name and model number of the tuner.To Connect a Cable TV Tuner without aComposite (RCA) Video Output:1. Review the information under “Before You Begin” onpage␣ 1. It contains important notes about the types ofvideo connections you can make.2. Connect the audio cables from the cable tuner’s AudioOut jacks to the receiver’s VIDEO2, VIDEO3, or VIDEO4PLAY IN jacks as shown to the left.3. Leave the cable tuner’s video out (RF jack) connecteddirectly to your VCR or TV (wherever you already haveit connected). See “How Do I Operate Devices?” onpage␣ 29 of the Users’ Guide for details about using thissetup.4. Go to “Noting Your Devices” on page␣ 3 and note whichjack you used to connect your tuner. In addition, notethe brand name and model number of the tuner.To Connect a Satellite Tuner:1. Review the information under “Before You Begin” onpage␣ 1. It contains important notes about the types ofvideo connections you can make.2. If your satellite tuner has a digital output jack, connecta digital (coaxial or optical) cable between the satellitetuner’s digital output jack and the receiver’s VIDEO2,VIDEO3 or VIDEO4 digital input jack as shown in thefigure on the left.Note that the jack sets are linked, even though they arenot adjacent. You must connect all of the cables fromyour satellite receiver to a linked jack set. For example,if you connect the analog cables to VIDEO2 and thedigital optical cable to VIDEO3,␣ your satellite receiverwill not work correctly.3. Connect the audio and video cables from the satellitetuner’s Audio and Video Out jacks to the receiver’sVIDEO2, VIDEO3, or VIDEO4 PLAY IN jacks as shownto the left.4. Go to “Noting Your Devices” on page␣ 3 and note whichjack you used to connect your tuner. In addition, notethe brand name and model number of the tuner.