Kenwood VR-4700 Connection Manual

Also see for KRF-V9993D: Service manual Service manual User guide How to operate Connection and setup guide

Contents

98TroubleshootingPowerTouchMy PowerTouch is not responding• Make sure you are within the operating range for PowerTouch. See“How is PowerTouch Powered ?” on page␣ 5 of this manual.• Replace the batteries. See Chapter Two of the Connections and SetupGuide.• If you’re using an IR receiver, make sure it is connected properly andturned on. See Chapter Four of the Connections and Setup Guide.• Check the contrast of the PowerTouch’s screen is adjusted properly.See “How Do I See PowerTouch’s Screen More Clearly?” on page 63.My PowerTouch is beeping. What does that mean?The following table includes information about PowerTouch beeps:Number Tone Meaning1 high Confirms your most recent button push ortouch1 low Indicates that your most recent buttonpush or touch could not be performed2 high Confirms learning or copying2 low Indicates that learning or copying was notsuccessfulPowerTouch does not "learn" new commands or functions.• Check that the distance between PowerTouch and the device's remoteis properly set. Do not place the devices remote right againstPowerTouch.• Check whether the PowerTouch is too close to the receiver, a TV, high-frequency fluorescent lighting or other electrical appliance.• "Learning" may be not carried out with some devices' remote.I want to clear all the items in PowerTouch and make it to the fac-tory-set default condition.• While pressing and holding the CONFIRM and VOLUME DOWNbutton, use the stylus to press the RESET button at the bottom of thebattery case.