Kenwood VR-4700 Connection Manual

Also see for KRF-V9993D: Service manual Service manual User guide How to operate Connection and setup guide

Contents

37Remote SetupChapter Two : Setting Up PowerTouch7. Touch or to select the next speaker.8. Carefully listen to the volume level of the test noise. Ifthe noise is a different volume than the noise from theleft front speaker, use or to adjust the vol-ume so that the volume matches the volume from theleft front speaker. (Do not be concerned with the vol-ume number readout on the Level display—this is forreference purposes only. Use your ears to determine ifthe two speakers are playing at the same volume).9. Repeat steps 7 and 8 until all the system’s speakers (exceptthe subwoofer) play at the same volume.10. To confirm the volume levels, touch until the TestTone display reads “Auto.” The test noise will automati-cally cycle between all of the speakers. Fine-tune the chan-nel levels as necessary.11. When all the channels sound like they’re the same vol-ume, you’ve balanced your system.12. To turn off the test noise, touch until the Test Tonedisplay reads “Off.”Setting the Subwoofer Level: Because of the way hu-mans hear, the test noise the Speaker Level menu sendsthrough the subwoofer will not sound as loud as it re-ally is. (The Speaker Level menu subwoofer test noise isdesigned to be used with a sound pressure level meterfor balancing.)Because of this, you cannot use that test noise to prop-erly calibrate the level of your subwoofer by ear. To setthe subwoofer level, listen to familiar music or filmsthat have strong bass content and adjust the subwooferlevel until it sounds balanced with the rest of the speak-ers.13. Touch to move to the next speaker setting or touchto return to the Setup Surround menu.Identifying Devices For PowerTouch ControlOnce your speakers are set up and configured, you mustidentify your component devices to PowerTouch.PowerTouch can be set up to control any device: if the de-vice code is not already part of PowerTouch’s extensive li-brary, you can use the Learn feature to teach the device’scommands to PowerTouch. You can also use this Learn func-tion to expand the control capabilities of existing codes.For more information, see “What if my device does not workwith any of the codes on the list? What if I Want PowerTouchto Control Additional Functions?” on page␣ 39.How Do I Identify Devices?1. Make sure you have installed batteries and chosen amodel type.2. Touch (setup) on the Quick access menu toaccess the Setup menu.3. Touch IR button on the Setup menu to accessthe IR Setup menu.Surround SP Type1. If you are not already there, touch onthe Setup Surround menu to open the Surround SP Typemenu:2. Touch until the type of connection you usedappears:• Wired means that you connected the speakers to thereceiver via speaker wire as described in Chapter One.• Wireless is the setting for using wireless speakers.When it is set, the delay between signals will be cor-rected.3. Touch to return to the Setup Surround menu.4. Touch to return to the Setup menu. Touch it again toreturn to the Main menu. You are now finished settingup the speakers.