Kenwood VR-4700 Connection Manual

Also see for KRF-V9993D: Service manual Service manual User guide How to operate Connection and setup guide

Contents

Reveiver SetupChapter Three: Setting Up on the Receiver43Chapter Three: Setting Up on the ReceiverIt is possible to set up the speakers and register the inputdevices on the receiver main unit.However, some of the setting items such as the controlleddevice registration should also be set on the PowerTouch.If setup is made on the PowerTouch, it is not necessary torepeat any setup on the receiver side.Therefore, it is recommended to perform setup on thePowerTouch. This chapter describes the setup on the receiveronly as an alternative method in case the setup is not madeon the PowerTouch.Do not operate the PowerTouch during the receiver setup.Preparation for setupMost of the receiver control keys are accommodated insidethe panel door. Make the following preparation for setupon the receiver.1. Plug the power cord into a household power outlet.2. (VR-4900, VF-4700)Press the REMOTE POWER key to turn the receiver ON.(KRF-V9993D)Press the POWER switch to supply the main power. Thereceiver now enters the STANDBY mode (in which re-mote control is available). Then press the ON/STANDBYkey to turn the receiver ON.3. Open the panel door.Panel doorSpeaker setup1. Selecting the speakersSelecting the SUBWOOFER:1 Press the SET UP key inside the panel door to dis-play “SUBWOOFER OFF (or ON)”.2 Press the MULTI CONTROL (fi/%) key to select ON(when a subwoofer is used) or OFF (when not).Selecting the FRONT speakers:3 Press the SET UP key to display “FRONT LARGE (orNORMAL)”.4 Press the MULTI CONTROL (fi/%) key to selectFRONT LARGE (large-sized speakers) or NORMAL(normal-sized speakers).If the SUBWOOFER is set to OFF, the FRONT speak-ers are set automatically to LARGE and the CENTERspeaker selection display appears automatically.Selecting the CENTER speaker:5 Press the SET UP key to display “CENTER LARGE(or NORMAL or OFF)”.6 Press the MULTI CONTROL (fi/%) key to selectCENTER LARGE (large-sized speaker), NORMAL(normal-sized speaker) or OFF (no center speaker).If the FRONT is set to NORMAL, the CENTER speakercan be set to only either NORMAL or OFF.Selecting the SURROUND speakers:7 Press the SET UP key to display “SURROUNDLARGE (or NORMAL or OFF)”.8 Press the MULTI CONTROL (fi/%) key to selectSURROUND LARGE (large-sized speakers), NOR-MAL (normal-sized speakers) or OFF (no surroundspeaker).When the FRONT is set to NORMAL, the SUR-ROUND speakers can be set to only either NORMALor OFF.Selecting SW RE-MIX:9 Press the SET UP key to display “SW-REMIX OFF(or ON)”. If the SUBWOOFER is set to OFF, select-ing SW RE-MIX step will be skipped.0 Press the MULTI CONTROL (fi/%) key to select ONor OFF.- Press the SET UP key to proceed to “Selecting thespeaker volumes” below. To exit from setting, pressthe SET UP key repeatedly until “SETUP FIXED” isdisplayed.For details on the SW RE-MIX and the selection ofspeakers, please see page 36.Panel doorPress the DOOR OPEN/CLOSE key to open thepanel door. To close it, pressthe key again.Press the lower partof the panel door.VR-4900/KRF-V9993D VR-4700A SPEAKERS B INPUTMODE CD 2/TAPE 2MONITOR LISTENMODE SET UP SOUND MULTICONTROLfi % P.CALL MEMORY AUTO BANDfi %Key layout