10PreparationsLR LVIDEO 3VIDEO 2VIDEO 1S VIDEOR A L CLRLR BPLAY INPLAY INPLAY INREC OUTPLAY INMONITOROUT VIDEO 1DVDRDVDCD/DVDOPTICAL VIDEO 3OPTICAL MONITOROPTICALDIGITAL IN DIGITAL OUTVIDEO 2COAXIALCOAXIAL DIGITALOUT (AUDIO)Connect the video signal andanalog audio signals to the VIDEO2 jacks. (See “Connecting videocomponents”.) 9Component with DTS, DolbyDigital, or PCM OPTICALDIGITAL OUTConnect the video signal anddigital audio signals to the VIDEO3 jacks. (See “Connecting videocomponents”.) 9DOLBY DIGITAL RF OUT (AUDIO)COAXIAL DIGITAL OUT(AUDIO)OPTICAL DIGITAL OUT(AUDIO)LD playerRF digitaldemodulator(DEM-9991D)(sold separately)PCM OUTCD playerComponent with DTS, DolbyDigital, or PCM COAXIALDIGITAL OUTOptical fiber cableOPTICAL DIGITAL IN(AUDIO)MD playerOPTICAL DIGITAL OUT(AUDIO)Digital connectionsSetting up the systemThe digital in jacks can accept DTS, Dolby Digital, or PCM signals. Connect components capable of outputting DTS,Dolby Digital, or standard PCM (CD) format digital signals.If you have connected any digital components to the receiver, be sure to read the “Input mode settings” sectioncarefully. 7To connect an LD player with a DIGITAL RF OUT, connect the LD player to the KENWOOD RF digital demodulator (DEM-9991D).Next, connect the DIGITAL OUT jacks of the demodulator to the DIGITAL IN jacks of the receiver.Connect the video signal and analog audio signals to the VIDEO 2 or VIDEO 3 jacks. (See “Connecting video components”.)