Kenwood VR-510 Instruction Manual

Also see for VR-510: Service manual Service manual

Contents

39Remote ControlSelect MACROMACRO1MenuPress the MUSIC, MOVIE, or TV key to select the macrolocation. (MACRO1, 2, and 3 respectively)3• You can store up to 3 different macros, one at each key:MUSIC = “MACRO 1”, MOVIE = “MACRO 2”, TV = “MACRO 3”• Pressing a key other than MUSIC, MOVIE, or TV cancels the macroprogram mode.Press the keys to be operated in order.45Press the MACRO key.• The macro is stored at the locations specified in step 3. If anothermacro was previously stored at the same location, it is erased.Repeat steps 1 through 5 to program up to 3 macros.This completes the macro programming procedure.EXAMPLE:1 Press the TV key, then press the AV POWER key to turnon the TV.2 Press the F. SHIFT key, then press the “3” (INPUT SEL.) keyto set the TV to the appropriate video input.3 Press the MOVIE key to select the LD player registered atVIDEO 2.4 Press the AV POWER key to turn on the LD player.This example shows you how to create a macro that; turns on the TV,sets the TV to the appropriate input, selects the receiver's input selectorto LD, and turns on the LD player. All you have to do is insert the laserdisc!• Make sure you start the next operation within 8 seconds of complet-ing the previous one. If more than 8 seconds elapses between any twosteps, exit the macro programming mode.• In order to allow verification of the remote control mode, the name ofthe selected input appears in the receiver's display when the MUSIC,MOVIE, or TV key is pressed. When the MUSIC or MOVIE key ispressed the receiver's input also changes.When MUSIC is pressed.2Press the MUSIC, MOVIE, or TV key to execute thecorresponding macro play.1Press the MACRO key.• "MACRO EXE" appears in the display and the pre-programmed macrois performed:MUSIC = “MACRO 1”, MOVIE = “MACRO 2”, TV = “MACRO 3”• Some devices take up to 1 second to power on. The macro functionhas an automatic delay after any power function output.• Pressing a key other than MUSIC, MOVIE, or TV cancels the macroprogram mode.When MUSIC is pressed.Select MACROMACRO EXEMenuSelect MACROMACRO1 EXEMenu• “MACRO EXE” appears in the display.MACRO MUSIC, MOVIE,TV+–+–During operation, make sure you start the next step within 8seconds of completing the previous one. If more than 8seconds elapses between any two steps, press the displayoperation key so that the display appears.Executing an automatic operationRemote control operations