Kenwood VR-510 Instruction Manual

Also see for VR-510: Service manual Service manual

Contents

33OperationsAmbience effectsDVD 6-channel playbackUsing a DVD player or the like equipped with six (5.1) output channels andthe receiver, you can enjoy surround sound playback.When you try to play a disc other than Dolby Digital such as DTS CD, nosound is produced or, noise may be heard. To avoid this situation, makesure that you connect the component to the receiver’s DVD/6ch. INPUTjacks through a surround processor which can decode the surroundsignal you want to listen to.Connecting a DVD player which can decode the surround signal itself isalso acceptable.Preparations• Connect your DVD player to the DVD/6ch jacks of the receiver.• Turn on all other components that will be used.• Complete “Preparing for surround sound”. ™INPUT SELECTORINPUT MODEMOVIE+–+–1Use the INPUT SELECTOR to select “DVD/6ch”or MOVIE keyon remote control (if it was registered beforehand) as theinput source.• If speaker system B is ON when “DVD/6ch” is selected as the inputsource, it switches off and speaker system A turns on automatically..• It is not possible to adjust the volume level or sound quality (SET UP,SOUND) of the channels separately when the receiver is in the DVD/6ch mode. Adjust the volume with the controls of the DVD player.For the powered subwoofer, you can adjust the volume of thesubwoofer using the subwoofer’s own volume control.Select “6ch INPT” by pressing the INPUT MODE key.2 Start playback of the DVD software.3 Adjust the volume.4Convenient functionsAdjusting the soundYou can make further adjustments to the sound while listening to playbackin the surround mode.1 Press the SOUND key until the desired item appears in thedisplay.Each time you press the button, the menu changes as follows:Note that some items are not displayed in certain modes.1 BASS (low frequency range sound quality adjustment -PCM andanalog stereo modes only) ∞2 TREB (high frequency range sound quality adjustment -PCM andanalog stereo modes only) ∞3 C (center speaker level adjustment)4 SR (right surround speaker level adjustment)5 SL (left surround speaker level adjustment)6 SW (subwoofer level adjustment)7 INPUT (input level adjustment - analog mode only) £8 NIGHT (midnight mode ON/OFF-Dolby Digital mode only)9 CINEMA or MUSIC (Circle Surround mode only)0 PANORAMA (Panorama mode ON/OFF*)- DIMENSION (Dimension adjustment*)= CENTER WIDTH (Center width adjustment*)*Pro Logic II Music mode only2 Use the MULTI CONTROL knob or 5/∞ keys to adjust the settingas desired.• The adjustment item is displayed for approximately 8 seconds.+—+—DIMMER/SOUNDVOL.SUB W.MULTI CONTROLSOUND LISTEN MODEVOLUMEDIMMERLISTEN M.5/∞