Kenwood VR-510 Instruction Manual

Also see for VR-510: Service manual Service manual

Contents

51Additional InformationNotes1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).AUDIO sectionRated power output during STEREO operation110 watts per channel minimum RMS, both channels driven, at8 Ω from 20 Hz to 20 kHz with no more than 0.7% total harmonicdistortion. (FTC)Effective power output during SURROUND operationFRONT (20-20kHz, 0.7% T.H.D. at 8 Ω one channel driven).............................................................................. 110 W + 110 WCENTER (20-20kHz, 0.7% T.H.D. at 8 Ω one channel driven)............................................................................................. 110 WSURROUND (20-20kHz, 0.7% T.H.D. at 8 Ω one channeldriven) .................................................................. 110 W + 110 WTotal harmonic distortion ......................... 0.045% (1 kHz, 55W, 8 Ω)Frequency responseCD ............................................. 10 Hz ~ 60 kHz, +0 dB, –3.0 dBSignal to noise ratio (IHF’66)PHONO (MM) ........................................................................ 75 dBCD ......................................................................................... 92 dBInput sensitivity / impedancePHONO (MM) ............................................................ 4 mV / 27 kΩCD ......................................................................... 300 mV / 47 kΩMONITOR IN ........................................................ 300 mV / 47 kΩDVD/6CH INPUT .................................................. 300 mV / 47 kΩOutput level / impedanceTAPE REC .............................................................. 300 mV / 1 kΩMONITOR OUT ...................................................... 300 mV / 1 kΩPRE OUT (FRONT, CENTER, SURROUND) ............. 1 V / 500 ΩPRE OUT (SUBWOOFER) ....................................... 1.8 V / 500 ΩTone controlBASS ................................................................ ±10 dB (at 70 Hz)TREBLE .......................................................... ±10 dB (at 10 kHz)DIGITAL AUDIO sectionSampling frequency ...................... 32 kHz, 44.1 kHz, 48 kHz, 96kHzInput level / impedance / wave lengthOptical ........................... (–15 dBm ~ –21 dBm), 660 nm ±30nmCoaxial ................................................................. 0.5 Vp-p / 75 ΩVIDEO sectionVIDEO inputs / outputsVIDEO (composite) ............................................ 1 Vp-p / 75 ΩS VIDEO (luminance signal) ................................ 1 Vp-p / 75 Ω(chrominance signal) ..................... 0.286 Vp-p / 75 ΩCOMPONENT VIDEO (luminance signal) ............. 1 Vp-p / 75 Ω(C B /C R - signal) ....... +/– 0.324 Vp-p / 75 ΩFM tuner sectionTuning frequency range ................................... 87.5 MHz ~ 108 MHzUsable sensitivity (MONO)................ 1.3 μV (75 Ω)/ 13.2 dBf (75 kHz DEV., SINAD 30 dB)50dB quieting sensitivitySTEREO ................................................... 28 μV (75 Ω)/ 40.2 dBfTotal harmonic distortion (1 kHz)MONO ............................................................ 0.5% (65 dBf input)STEREO ........................................................ 0.7% (65 dBf input)Signal to noise ratio (1 kHz, 75 kHz DEV.)MONO .......................................................... 75 dB (65 dBf input)STEREO ...................................................... 68 dB (65 dBf input)Stereo separation (1 kHz) .......................................................... 40 dBSelectivity (±400 kHz) ................................................................. 70 dBFrequency response ................. (30 Hz ~ 15kHz), +0.5 dB, –3.0 dBAM tuner sectionTuning frequency range10 kHz step ................................................. 530 kHz ~ 1,700 kHzUsable sensitivity ................................................. 16 μV / (600 μV/m)Signal to noise ratio (30% mod. 1 mV input) ........................... 50 dBGENERALPower consumption .................................................................... 2.6 AAC outletSWITCHED ....................................... (total 150 W, 1.25 A max.)Dimensions ..................................................... W : 440 mm (17-5/16")H : 144 mm (5-11/16")D : 399 mm(15-11/16")Weight (Net) .............................................................. 8.75 kg (19.3 lb)Specifications Caution : Read this page carefully to ensure safeoperation.

/ 52

Related manuals for Kenwood VR-510