Kenwood VR-9080 Instruction Manual

Also see for KRF-X9090D: Service manual Instruction manual

Contents

20 ENPreparing for surround soundBefore setting up the speakersFor the optimum surround playback, variety of speaker settings arenecessary.Following the procedure below, go through the settings described infurther pages.SETUP MULTI CONTROLPOWER ON/OFF(KRF-X9090D)MEMORY/ENTER(POWERON/STANDBY)SETUPMIC1When performing "Setting up the speakers automatically(AUTO SETUP)", connect the provided microphone for setupto the SETUP MIC jack.2Turn on the power to this receiver by pressing the (POWERON/STANDBY) key (VR-9080) or the POWER ON/OFF key and(POWER ON/STANDBY) key (KRF-X9090D), or the RECEIVERON key.3If you want to use the remote control unit, press the RCVMODE key on the remote control unit to set it to the receivercontrol mode.4Press the SETUP key to enter the SETUP mode.Use the 5/∞ keys or MULTI @/ #keys for the following dis-plays.1 AUTO SETUP2 MANUAL SETUP3 SW RE-MIX4 CROSSOVER5 SB SPACING6 BASS PEAK7 LFE LEVEL8 AUDIO DELAY9 DISPLAY MODE0 SETTING LOCK- EXITThe flow of the SETUP is as follows:AUTO SETUPSW RE-MIXCROSSOVERBASS PEAKAUDIO DELAYDISPLAY MODESETTING LOCKCALIBRATECONFIRMTEST SIG LVLRETURNRETURNSP SETUPSP LEVELSP DISTANCESTARTMeasuringCOMPLETERETURNERRORMESSAGEWARNINGMESSAGET. TONEAUTOT. TONEMANUALT. TONEOFFRETURNSB SPACINGLFE LEVELEXITAnalyzingMANUAL SETUP