Kenwood VR-9080 Instruction Manual

Also see for KRF-X9090D: Service manual Instruction manual

Contents

6 ENTHX DOLBY VIRTUAL STEREO INPUT MODEBASS BOOST DSP ACTIVE EQ DIMMERMULTI CONTROL LISTEN MODEINPUTSELECTORVOLUME CONTROLAV AUX/GAMESOUND TONE SETUPBAND AUTO/MONOMEMORY/ENTERA SPEAKERS BPHONESTHX96kHz fsACTIVE EQDOLBY DIGITALDTSDSPS VIDEO VIDEO L-AUDIO-RLSL S SB SRC RSP MUTE6CH INPUTDIGITAL DOLBY DIGITAL EXDOLBY EXDOLBY PL II xDOLBY HDOLBY VSDTS 96/24ES MATRIX6.1ES DISCRETE6.1STEREO96kHzfsLOUDNESSNEO:6SLEEPCLIPAUTO DETECTAUTOMEMORYSTEREOTUNEDSWLFEA BTHXSurround EXDSP MODESETUP MICPOWER-ON –OFFNames and functions of partsMain unit1 POWER ON/OFF key )(For KRF-X9090D)Use to turn the main power ON/OFF.2 (POWER ON/STANDBY) key )Use to turn the power ON/STANDBY.Standby indicator3 SPEAKERS A/B keys ¶Use to turn the A/B speakers on or off.4 Surround LED (light-emitting diode)indicatorsTHX indicator flLights when the THX mode has been chosen.THX mode may or may not be activateddepending upon the applicable playbackmode.96kHz fs indicator ‚Lights when the receiver is in the 96kHzLPCM playback mode.ACTIVE EQ indicator •Lights when the receiver is in the ACTIVE EQmode.DOLBY DIGITAL indicator flLights when the receiver is in the DolbyDigital mode.DTS indicator ‡Lights when the receiver is in the DTS mode.DSP indicator ‡Lights when the receiver is in the DSP mode.5 INPUT SELECTOR key ¶Use to select input sources.6 VOLUME CONTROL knob ¶7 SETUP MIC jack )Use for SETUP MIC.8 PHONES jack ªUse for headphone listening.9 THX key flUse to switch the status of THX.DOLBY VIRTUAL key °Use to select the Dolby Virtual Speaker andthe Dolby Headphone setting.STEREO key ‡Use to switch the listen mode to STEREO.INPUT MODE key 8Use to select the Input mode.BASS BOOST key ªUse to select BASS BOOST setting.DSP key ‡Use to select any of the DSP mode.ACTIVE EQ key •Use to select ACTIVE EQ setting.DIMMER keyUse to adjust the brightness of the display.qUse to select the REC MODE. ºStandby modeWhile the standby indicator is lit, a small amount of power is supplied tothe system to back up the memory. This is called standby mode. Under thecondition, the system can be turned ON by remote control unit.0 SOUND key ·Use to adjust the sound quality and theambience effects.TONE key ªUse to switch the status of TONE control.BAND key ⁄Use to select the broadcast band.AUTO/MONO key ⁄Use to select the auto or manual tuningmode.! SETUP key )Use to select the speakers' settings etc.MEMORY/ENTER keyUse to store radio stations in the presetmemory. ⁄Use to establish a selection.@ 5/∞ keys )Use for selection adjustments during sound,setup and preset channel functions.# MULTI CONTROL knobUse to control a variety of settings.$ LISTEN MODE knob flUse to select the listening mode.% AV AUX/GAME key (¶Use to switch the input to AV AUX or GAME.^ AV AUX (S VIDEO, VIDEO, L-AUDIO-R)jacks (Display* Input channel indicatorsOutput channel indicatorsAUTO indicatorMEMORY indicatorSTEREO indicatorTUNED indicatorFrequency displayInput displayPreset channel displaySurround mode displaySpeakerindicatorsMUTEindicatorCLIPindicatorInput modeindicatorsListen mode indicatorsSLEEP indicator* Input channel indicatorsInput channel indicatorslight up according to theincoming audio signals."S" indicator will light upwhen the surroundcomponent of the audiosignals is only 1 channel.The figure is the view when the front cover is open.CAUTIONThe power in this equipment will not be completely cut off from the ACwall outlet when the main switch is turned OFF.