31 ENListening to radio broadcastsThis model can store up to 40 stations in the memory and recall them byone-touch operation.Tuning radio stationsMULTI CONTROLINPUTSELECTORBANDAUTO/MONO1Use the INPUT SELECTOR key or the TUNER key to select thetuner.2Use the BAND key to select the desired broadcast band.Each press switches the band.LSL S SB SRC RLFESP MUTEA B CLIPSTEREOAUTO3Use the AUTO/MONO key to select the desired tuning method.Each press switches the tuning method to either auto or manualtuning.“AUTO” indicator lights up in the display.RDSRTYSTEREOAUTO• Normally, set to “AUTO” (auto tuning). If the radio waves are weakand there is a lot of interference, switch to manual tuning. (Withmanual tuning, stereo broadcasts will be received in monaural.)4Use the MULTI CONTROL knob or MULTI %/ fikeys, orTUNING 1/ ¡keys to select the station.“STEREO” lights when a broadcast is being received in stereo.AUTOMEMOSTEREOTUNEDSTEREO“TUNED” is displayed when a station is received.Auto tuning : The next station is tuned automatically.Manual tuning : Turn the knob or use the MULTI %/fi keys toselect the desired station.Presetting radio stations manuallyMULTI CONTROLMEMORY/ENTER1Tune to the station you want to store.2Press the MEMORY/ENTER key while receiving the station.Blinks for 20 seconds Lights for 20 secondsLSL S SB SRC RLFESP MUTEA B CLIPMEMORYSTEREOAUTOSTEREOTUNEDProceed to step 3 within 20 seconds.(If more than 20 seconds elapse, press the MEMORY/ENTERkey again).3Use the MULTI CONTROL knob to select one of the stationpresets (1 – 40).4Press the MEMORY/ENTER key again to confirm the setting.• Repeat steps 1, 2, 3, and 4 to store as many stations asnecessary.• If you store a station at a previously used preset, the old station willbe replaced by the new one.