Kenwood VR-9080 Instruction Manual

Also see for KRF-X9090D: Service manual Instruction manual

Contents

39 ENAmbience effectsAdjusting the soundYou can make further adjustments to the sound while listening toplayback in the surround mode.SOUND LISTEN MODEMULTI CONTROLSTEREOSTEREOSOUNDRCV MODE1 For the remote control unit, press the RCV MODE key to switchto receiver mode.2 Press the SOUND key and then use the 5/∞ keys or MULTI @/# keys until the desired item appears in the display.Each time you press the 5/∞ keys or MULTI @/# keys, the menuchanges as follows:Note that some items are not displayed depending on speakersettings and listening modes.1 CNTR (Center speaker level adjustment)*2 SR (Surround Right speaker level adjustment)*3 SB (Surround Back speaker level adjustment)*4 SBR (Surround Back Right speaker level adjustment)*5 SBL (Surround Back Left speaker level adjustment)*6 SL (Surround Left speaker level adjustment)*7 SUBW (Subwoofer level adjustment)*8 INPUT (Input level adjustment - analog mode only) •9 MIDNIGHT (Midnight mode ON/OFF - Dolby Digital and DTS modeonly)0 PANORAMA (Panorama mode ON/OFF )**- DIMENSION (Dimension adjustment)**= CENTER WIDTH (Center width adjustment)**~ CENTER IMAGE (Center image adjustment - Neo:6 Music modeonly)! DUAL MONO (Dual Mono selection - Dolby Digital mode only)* The adjustment is only temporary for the current input selection.The value will return automatically to the original setup value whenthe power is turned on/off.** Pro Logic IIx Music and Pro Logic II Music mode only.• If you have selected “SB NML/THXx1” or “SB LARGEx1”, “SBR”and “SBL” are not appeared but “SB” is appeared on the Display.3 Use the MULTI CONTROL knob or MULTI %/fi keys to adjust thesetting as desired.• The adjustment item is displayed for approximately 20 seconds.4 Press the SOUND key again to return to the input indication.Midnight mode (Dolby Digital and DTS mode only)When watching movies at night , you might not be able to raise the volume asloud as normal. Midnight mode compresses the dynamic range of previouslyspecified heavy sound passage of the Dolby Digital and DTS sound track (likescenes with sudden increases in volume) to minimize the difference in volumebetween the scenes with heavy sound passage and scenes with normal soundpassage. This makes it easy to hear all of the sound track, even when listeningat low volumes.1 Press the SOUND key, then press the 5/∞ keys or MULTI @/#keys until “MIDNIGHT” appears on the display.• This can be selected only if CD/DVD, DVD/6CH, VIDEO 2 or VIDEO 3is selected as the source and the input signal is set to “Dolby Digital”or “DTS”.2 Use the MULTI CONTROL knob or MULTI %/fi keys to select theON or OFF setting.LSL S SB SRC RLFESP MUTEA B CLIPDIGITAL DOLBY DIGITAL STEREOAUTO DETECT• The adjustment item is displayed for approximately 20 seconds.• Some Dolby Digital or DTS software may not be compatible with theMidnight mode.3 Press the SOUND key again to return to the input indication.Panorama mode (Pro Logic IIx Music mode and Pro Logic IIMusic mode only)When listening to music, you will be able to enjoy the “wrap-around”sound effect when you adjust the panorama mode.1 Press the SOUND key, then press the 5/∞ keys or MULTI @/#keys until “PANORAMA” appears on the display.2 Use the MULTI CONTROL knob or MULTI %/fi keys to selectPANORAMA ON or OFF.1 PANORAMA ON : PANORAMA mode is ON.2 PANORAMA OFF : PANORAMA mode is OFF.LS SBRLFESP MUTEA B CLIP DOLBY PL II xSTEREOAUTO DETECT3 Press the SOUND key again to return to the input indication.