140 Keysight E8402A, E8404A C-Size Mainframes User and Service GuideProgramming the Enhanced Monitor STATus SubsystemSTATus:QUEStionable:TEMPerature:ENABle <mask>STATus:QUEStionable:TEMPerature:ENABle?The STATus:QUEStionable:TEMPerature:ENABle command sets the value of theenable register for the TEMPerature status group.The STATus:QUEStionable:TEMPerature:ENABle? query returns an integerrepresenting the value of the enable register for the TEMPerature status group.The enable register specifies which bits in the event register can generate asummary bit. The instrument logically ANDs corresponding bits in the event andenable registers, and ORs all the resulting bits to obtain a summary bit. Summarybits are, in turn, recorded in another register. The questionable temperaturestatus summary bit is recorded in the Questionable Condition Register. Enableregisters are read-write. Enable registers are not affected by *CLS (Clear status).Querying enable registers does not affect them.ParametersReturned DataComments– Refer to STATus:QUEStionable:TEMPerature:CONDition? for a description ofeach bit in the TEMPerature status group.– If *PSC was set to 0 prior to power-down, then at power-on, the enableregisters are loaded from non-volatile memory. Therefore, any values thatyou have stored (SYSTem:NVSave command) are returned to the registers.However, if *PSC was set to 1, then at power-on the factory defaults arereturned.Name Type Range Default Description<mask> int16 0 - 32767 32767(see 2ndcomment below)Bit mask for the enable register of theTEMPerature status group.Type Range Descriptionint16 0 - 32767 Mask value.
