228 Keysight M8070A Programming Guide5 SCPI Command Reference:OUTPut:DEMBedding:SCABle:STATe[?]Syntax :OUTPut:DEMBedding[:SCABle][:STATe] ‘identifier’, :OUTPut:DEMBedding[:SCABle][:STATe]? ‘identifier’InputParameters‘identifier’:'M*.DataOut1’,‘M*.DataOut2’,‘M*.DataOut3’,or ‘M*.DataOut4’OFF | ON | 0 | 1: Enables/disables standard cable compensation.Return Range 0|1Description This command switches on/off the standard cable compensation on thespecified output.The query return the present setting.This SCPI is applicable for M8195A and M8196A.Example :OUTP:DEMB:SCAB:STAT ‘M1.DataOut1’, ON:OUTPut:DEMBedding:SPARameter:STATe[?]Syntax :OUTPut:DEMBedding:SPARameter[:STATe] ‘identifier’, :OUTPut:DEMBedding:SPARameter[:STATe]? ‘identifier’InputParameters‘identifier’:'M*.DataOut1’,‘M*.DataOut2’,‘M*.DataOut3’,or ‘M*.DataOut4’Description This command switches on/off the compensation via S-parameter file onthe specified output.The query return the present setting.This SCPI is applicable for M8195A and M8196A.Example :OUTP:DEMB:SPAR:STAT ‘M1.DataOut1’, ON:OUTPut:DEMBedding:SPARameter:PROFile[?]Syntax :OUTPut:DEMBedding:SPARameter:PROFile ‘identifier’, <”Filename”>:OUTPut:DEMBedding:SPARameter:PROFile? ‘identifier’InputParameters‘identifier’:'M*.DataOut1’,‘M*.DataOut2’,‘M*.DataOut3’,or ‘M*.DataOut4’Description This command selects the S-Parameter profile. S-parameter is defined byfrequency/real/imaginary tuples for 1 to 9 port components.The query return the present setting.
