ML610Q174 User’s ManualChapter 31 On-Chip Debug FunctionFEUL610Q174-01 31-131. On-Chip Debug Function31.1 OverviewThis LSI has an on-chip debug function that enables flash memory reprogramming.To use the on-chip debug function, connect the LSI to the on-chip debug emulator (uEASE).31.2 How to Connect the On-Chip Debug EmulatorFigure 31-1 shows the connections to the on-chip debug emulator (uEASE).For the on-chip debug emulator, refer to the “uEASE User’s Manual.”Figure 31-1 Connections to the On-Chip Debug Emulator (uEASE)Note:• Do not use LSI used for debugging as a mass-production article.• When using the on-chip debug function or flash memory reprogramming function after mounting the LSI on theboard, design the board so that the six pins of V DD , V SS, ,TEST1_N and TEST0 which are required for connection tothe on-chip debug emulator, are capable of connection. Also, apply 2.7 to 5.5 V to V DD.• For details, refer to the “uEASE User’s Manual” and the “uEASE connection Manual”.ML610Q174TEST0V DDV SSuEASERESET_NTESTV DDV SSUser applicationInterface connectorTEST1_N
