ML610Q174 User’s ManualAppendix C Electrical CharacteristicsFEUL610Q174-01 C-1Appendix C Electrical Characteristicsy Absolute Maximum Ratings(VSS = 0V)Parameter Symbol Condition Rating UnitPower supply voltage 1 V DD Ta = 25°C −0.3 to +7.0 VPower supply voltage 2 V DDL Ta = 25°C −0.3 to +3.6 VPower supply voltage 3 V L1 Ta = 25°C −0.3 to +2.33 VPower supply voltage 4 V L2 Ta = 25°C −0.3 to +4.66 VPower supply voltage 5 V L3 Ta = 25°C −0.3 to +7.0 VReference voltage V REF Ta = 25°C −0.3 to VDD+0.3 VAnalog input voltage VAI Ta = 25°C −0.3 to VDD+0.3 VInput voltage VIN Ta = 25°C −0.3 to VDD+0.3 VOutput voltage VOUT Ta = 25°C −0.3 to VDD+0.3 VOutput current 1 IOUT1 Port3,4,5,8,C,D,F Ta = 25°C −12 to +11 mAOutput current 2 IOUT2 Port2,9 Ta = 25°C −12 to +20 mAPower dissipation PD Ta = 25°C 1 WStorage temperature T STG ― −55 to +150 °Cy Recommended Operating Conditions(VSS = 0V)Parameter Symbol Condition Range UnitOperating temperature T OP ― −40 to +85 °COperating voltage V DD ― 2.2 to 5.5 VReference voltage V REF ― 4.5 to VDD VAnalog input voltage VAI ― VSS to VREF VOperating frequency (CPU) f OP ― 30k to 8.4M HzLow-speed crystal oscillation frequency f XTL ― 32.768k HzCapacitor externally connected to VDD pin CV ― 10±30% μFCapacitor externally connected to Vref pin CAV ― 1±30% μFCDL 12 to 25Low-speed crystal oscillationexternal capacitor CGLUse 32.768KHz CrystalOscillator DT-26(DAISHINKU CORP.) 12 to 25pFHigh-speed crystal/ceramic oscillationfrequency f XTH ― 8M/8.192M HzCDH ― 47±30%High-speed crystal oscillationexternal capacitor* CGH ― 47±30% pFCapacitor externally connected to VDDL pin CL ― 10±30% μF* CGH and CDH are built into, external capacity is unnecessary for CSTLS8M00G56 (made by Murata Mfg.).
