La Marche TPSD Installation And Operation Manual
Also see for TPSD: Instructions
                                              | |
Contents
| 
162.7 Enabling Load SharingAll TPSD units include the Load Sharing feature. Load sharing allows the customer to parallel with any identicalTPSD to share a DC load and therefore reduce the strain on each charger. Chargers to be paralleledMUST bethe same output (Voltage and Current).Load Sharing ProcedureBefore making any connections to the TPSD ensure that the AC Power is off at the main breaker box and thatboth of the units’ breakers are off. Verify that no voltage is present by using a voltmeter at all input and outputterminals.1. Connect the DC Output of both units in parallel to the same DC load/battery.2. Locate terminal strip TS-5 inside both of the chargers.3. As illustrated in Figure 12, connect the LS terminal of one charger to the LS terminal of the second charger.4. Once batteries are fully charged and/or loads are stabilized, turn OFF all chargers except for one.5. Take a voltage reading on the output of the charger.6. Turn on the next charger, turn off the first charger.7. Set the output voltage of the second unit to match the first by adjusting the float potentiometer.8. After all chargers have been adjusted, turn ON all chargers9. Follow the same procedure for setting the equalize voltage.Figure 12 - Load Sharing Connection(Schematic wiring) |
Related manuals for La Marche TPSD
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine