La Marche TPSD Installation And Operation Manual
Also see for TPSD: Instructions
                                              | |
Contents
| 
iiUnit Location Allow at least 6 inches of free air on all vented surfaces for proper cooling Allow sufficient clearance to open the front panel for servicing. Do not operate this unit in a closed-in area or restrict ventilation in any way. Do not set any battery on top of this unit. Never allow battery electrolyte to drip on this unit when reading the specific gravity or filling the battery. Never place this unit directly above a standard flooded battery. Gases from the battery will corrode anddamage equipment. A sealed maintenance free or valve regulated lead acid (VRLA) battery may be placed below this equipment.Check for DamagesPrior to unpacking the product, note any damage to the shipping container. Unpack the product and inspect theexterior of product for damage. If any damage is observed, contact the carrier immediately. Continue theinspection for any internal damage. In the unlikely event of internal damage, please inform the carrier andcontact La Marche for advice on the risk due to any damage before installing the product. Verify that you haveall the necessary parts per your order for proper assembly.CAUTION: Failure to properly file a claim for shipping damages, or provide a copy of the claim to LaMarche, may void warranty service for any physical damages reported for repair.Returns for ServiceSave the original shipping container. If the product needs to be returned for service, it should be packaged in itsoriginal shipping container. If the original container is damaged/unavailable, make sure the product is packedwith at least three inches of shock-absorbing material to prevent shipping damage.La Marche is notresponsible for damage caused by improper packaging of returned products.Inspection Checklist・ Enclosure exterior and interior is not marred or dented.・ There is no visible damage components.・ all internal components are secure.・ Printed circuit boards are firmly seated.・ All hardware and connections are tight.・ All wire terminations are secure.・ All items on packing list have been included.HandlingEquipment can be very heavy and/or top heavy. Use adequate manpower or equipment for handling. Until theequipment is securely mounted, care must be used to prevent equipment from be accidentally tipped over. |
Related manuals for La Marche TPSD
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine