4: Configuration Using Web ManagerWiPort Embedded Wireless Device Server User Guide 294. On the main menu, click Apply Settings.Host List ConfigurationThe WiPort scrolls through the host list until it connects to a device listed in the hostlist table. After a successful connection, the unit stops trying to connect to any others.If this connection fails, the unit continues to scroll through the table until the nextsuccessful connection.The host list supports a minimum of 1 and a maximum of 12 entries. Each entrycontains an IP address and a port number.Note: The host list is disabled for Manual and Modem Mode. The unit will notaccept a data connection from a remote device when the hostlist option isenabled.To configure the WiPort’s host list:1. From the main menu, click the Hostlist tab.Figure 4-5. Hostlist Settings2. Enter or modify the following fields from the Hostlist Settings window:Retry SettingsRetry Counter Enter the value for the number of times the WiPort shouldattempt to retry connecting to the host list.Retry Timeout Enter the duration (in milliseconds) the WiPort shouldabandon attempting a connection to the host list.Host InformationHost Address Enter or modify the host’s IP address.Port Enter the target port number.
