4: Configuration Using Web ManagerWiPort Embedded Wireless Device Server User Guide 37Email ConfigurationThe unit sends an email to multiple recipients when a specific trigger event occurs.There are three separate triggers, based on any combination of the configurable pinswhen selected as user I/O functions. Optionally, use a two-byte serial string to initiatea trigger. Each trigger is independent of the others. Each condition within anindividual trigger must be met before the unit will send the email.To configure the WiPort’s email settings:1. From the main menu, select Email to open the Email Settings window.Figure 4-9. Email Settings2. Configure the following fields:Server IP Address Enter the IP address of the mail server.Server Port Enter the port number on the email server.Domain Name Enter the email server’s domain name.Unit Name Enter the username used by the WiPort to send email messages.Note: Do not use spaces in the name.RecipientsRecipient 1:Email AddressEnter the email address designated to receive email notifications.Recipient 2:Email AddressEnter an additional email address designated to receive emailnotifications.3. When you are finished, click the OK button.4. On the main menu, click Apply Settings.
