Lantronix XPress DR+ User Manual

Also see for XPress DR+: User guide User guide Quick Connect User guide

Contents

Lantronix XPress DR+ User Manual Manual pdf 27 page image

4: Using DeviceInstallerXPress DR+ User Guide 27Note: If the unit already has an IP address (e.g., DHCP has assigned an IPaddress), click the Search icon and select the unit from the list of Lantronixdevice servers on the local network.2. Click the Assign IP icon .3. If prompted, enter the hardware address (on the product label) and click Next.4. Select Assign a specific IP address and click Next.5. Enter the IP address. The Subnet mask displays automatically based on the IPaddress; if desired, you may change it. On a local network, you can leave the Defaultgateway blank (all zeros). Click Next.6. Click the Assign button and wait several seconds until a confirmation messagedisplays. Click Finish.7. Select the device from the main window list and select Ping from the Tools menu.The Ping Device dialog box shows the IP address of the selected unit.8. Click the Ping button. The results display in the Status window. Click the ClearStatus button to clear the window so you can ping the device again.Note: If you do not receive “Reply” messages, make sure the unit is properlyattached to the network and that the IP address assigned is valid for theparticular network segment you are working with. If you are not sure, checkwith your systems administrator.9. Click the Close button to close the dialog box and return to the main window.Accessing the XPress DR+ Using DeviceInstaller1. Click StartÆPrograms Æ LantronixÆDeviceInstallerÆDeviceInstaller.2. Click the Search icon to display all Lantronix units on the network.3. Click the XPress DR+ folder. The list of available Lantronix XPress DR+ devicesdisplays.4. Expand the list of XPress DR+ devices by clicking the + symbol next to theXPress DR+ icon. To view the unit's current configuration, select the unit by clickingits IP address.Viewing the Current ConfigurationDeviceInstaller provides a view of the unit's configuration.To view the unit's current settings:1. Follow the instructions above to locate the XPress DR+.2. In the right pane, click the Device Details tab. The current XPress DR+ configurationdisplays.