5: Configuration Using Web-ManagerXPress DR+ User Guide 36Retry SettingsRetry Counter Enter the value for the number of times the XPress DR+should attempt to retry connecting to the host list. The defaultsetting is 3.Retry Timeout Enter the duration (in seconds) the XPress DR+ shouldabandon attempting a connection to the host list. The defaultsetting is 250.Host InformationHost Address Enter or modify the host’s IP address.Port Enter the target port number.3. When you are finished, click the OK button.4. To save and reboot, click Apply Settings on the main menu.Channel ConfigurationThe Channel 1 and Channel 2 configurations define how the serial ports respond tonetwork and serial communication.Note: Channel 1 and Channel 2 have the same defaults except for the port number(10001 for Channel 1 and 10002 for Channel 2). The procedures below are for Channel1; they are the same for Channel 2.Serial SettingsTo configure the channel’s serial settings:1. On the main menu, click Serial Settings (below Channel 1) to display the SerialSettings window.
