9: Setup Mode: Advanced SettingsXPress DR+ User Guide 66Disable TFTP Firmware Update (N) : _Disable Port 77FE (Hex)Note: If you choose to disable this option, keep in mind that disabling bothTelnet Setup and Port 77FE will prevent users from accessing Setup Mode fromthe network.Port 77FE is a setting that allows DeviceInstaller, Web-Manager, and custom programsto configure the unit remotely. You may wish to disable this capability for securitypurposes.Disable Port 77FEh (N) ? _The default setting is the N (No) option, which enables remote configuration. You canconfigure the unit by using DeviceInstaller, Web-Manager, Telnet, or serial configuration.The Y (Yes) option disables remote configuration and web sites.Note: The Y (Yes) option disables many of the GUI tools for configuring the unit,including the embedded Web-Manager tool.Disable Web ServerThis setting defaults to the N (No) option. The Y (Yes) option disables the web server.Disable Web Server (N) ? _Disable Web SetupThe Y (Yes) option disables configuration using the Web-Manager. This setting defaultsto the N (No) option.Disable Web Setup (N) ? _Disable ECHO PortsThis setting controls whether port 7 echoes characters it receives.Disable ECHO ports (Y) ? _Enable Enhanced PasswordThis setting defaults to the N (No) option, which allows you to set a 4-character passwordthat protects Setup Mode by means of Telnet and web pages. The Y (Yes) option allowsyou to set an extended security password of 16-characters for protecting Telnet and webpage access.Enable Enhanced Password (Y) ? _
