Playing a Disc 13Before you begin, turn on the power of any equipment connectedto the TV/DVD. Make sure other equipment is set to the correctchannel. Details are on page 10-11.1 Press STANDBY-ON to turn on the TV/DVD.2 Press OPEN/CLOSE A to open the disc tray. Theunit will switch to DVD mode automatically.3 Place a disc on the tray. Some DVDs are recorded onboth sides. Make sure the label of the side you want toplay is facing up.Or, if the DVD is recorded on only one side, place thedisc on the tray with the label facing up and the shiny sidefacing down.4 Press PLAY B to close the tray. The tray will closeand playback will begin. If playback does not startautomatically, press PLAY B again.If a DVD menu appears instead, see page 28.To play MP3 or JPEG files, see page 42-43.You also can close the tray by pressingOPEN/CLOSE A.5 Press STOP C to stop playback.REMINDER : Only certain discs will play.See page 7 for details.• Even if you turn off the unit inDVD mode, if you turn it onagain with the STANDBY-ONbutton, it will be in TV/DVDmode. If the unit was shut downby unplugging the power cordor due to a power failure, it willbe in DVD mode when youturn it on again.• An “X” may appear on thescreen when you try to access afeature that is not available.Thisis not a problem with theTV/DVD.• If a disc is dirty or scratched,the picture may be distorted orplayback may stop. Remove thedisc and try a different one.• Pressing OPEN/CLOSE A orPLAY B when the power is offturns on the unit in DVD mode(instead of the usual TV mode).• If a disc has multiple layers, thepicture may freeze occasionally.This happens when the firstlayer switches to the secondlayer.This is not a malfunction.Helpful Hints1 245T9103_8103UD_EN_0411 4/11/05 10:43 AM Page 13