Audio Language, Stereo Sound 37● Before you begin, press SELECT to put theTV/DVD in DVD mode.Then, press PLAY B orOPEN/CLOSE A to activate DVD mode.Audio LanguageYou can select a language for DVDs during playback ifmultiple languages are available.1 During DVD playback, press AUDIO repeatedlyto choose one of the available languages. Audiodisplay appears at the top of the TV screen, and thenew audio will be heard.The display will disappearafter about five seconds.The audio display may show the current settings forthe Dolby Digital or multi-channel (5.1CH) sound, ifthey are available on the disc, and the sampling rate ofthe disc.The number of available languages appearsafter the “ / ” at the right of the display ( /3, forexample).Stereo SoundAdjust Stereo Sound to determine whether you will hear theleft channel, the right channel or both channels (stereo)during Audio CD or Video CD playback.1 Press AUDIO repeatedly during Audio CD orVideo CD playback to choose STEREO, L-ch orR-ch. The display will disappear in about five seconds.STEREOOnly the right channel is heard.L-chR-chOnly the left channel is heard.Both right and left channelsare heard (stereo).11• If a language is not availableafter pressing AUDIO severaltimes, the DVD does not havethat language.• Some DVDs only let youchange the language in the discmenu.• Audio languages may beabbreviated (such as ENG forEnglish). Or, three dashes (- - -)may appear instead of anabbreviation.Helpful HintsT9103_8103UD_EN_0411 4/11/05 10:43 AM Page 37