Hooking Up the TV/DVD 9ANT.INOUTANT.Connect an RFcoaxial cable (notsupplied) to theOUT jack on theCable Box/Satellite Receiverand to the ANT.jack on theTV/DVD.Connect a Cable TVsignal or an antenna tothe ANT. jack.1 Hook up your TV/DVD using oneof the connections shown.A Hooking Up Your TV/DVD with aCable TV Signal or OutdoorAntennaConnect theCable TV orSatellite signal tothe IN jack on theCable Box orSatellite Receiver.B Hooking Up Your TV/DVD with aCable Box/Satellite ReceiverTo view any channel, set the TV/DVD tothe output channel (channel 03 or 04) ofthe Cable Box/Satellite Receiver. Then,select channels at the Cable Box/SatelliteReceiver.Your Cable Box/Satellite Receiver may have audio/video out jacks instead of the single antennaout jack (RF coaxial or 75 ohm) shown here.If so, connect audio/video cables to the audio/video out jacks of the Cable Box/Satellite Receiverand to the AUDIO/VIDEO IN jacks on the front of the TV/DVD.Press SELECT on the remote to set the TV/DVD to AUX, not channel 3 or 4. Select channelsyou want to watch at the Cable Box/Satellite Receiver as usual, leaving the TV/DVD on AUX.Instructions continue on the next page.T9103_8103UD_EN_0411 4/11/05 10:43 AM Page 9