Magnavox 19MDTR20 Service Manual

Also see for 19MDTR17: Features

Contents

1-5-1 T0006DCCABINET DISASSEMBLY INSTRUCTIONS1. Disassembly FlowchartThis flowchart indicates the disassembly steps for thecabinet parts, and the CBA in order to gain access toitem(s) to be serviced. When reassembling, follow thesteps in reverse order. Bend, route and dress thecables as they were.Caution !When removing the CRT, be sure to discharge theAnode Lead of the CRT with the CRT Ground Wirebefore removing the Anode Cap.2. Disassembly Method(1): Order of steps in Procedure. When reassembling,follow the steps in reverse order.These numbersare also used as the Identification (location) No. ofparts in Figures.(2): Parts to be removed or installed.(3): Fig. No. showing Procedure of Part Location.(4): Identification of part to be removed, unhooked,unlocked, released, unplugged, unclamped, ordesoldered.S=Screw, P=Spring, L=Locking Tab, CN=Connec-tor, *=Unhook, Unlock, Release, Unplug, or Desol-der2(S-2) = two Screws (S-2)(5): Refer to the following "Reference Notes in theTable."ID/LOC.No.PARTREMOVALFig.No.REMOVE/*UNHOOK/UNLOCK/RELEASE/UNPLUG/DESOLDERNote[1] RearCabinet 1 6(S-1), (S-2), 2(S-3) -[2]TrayChassisUnit2, 3,5Anode Cap, *CN501A,CRT CBA, *CN571,*CN601, *CN802,*CN18011[3] CRT 3, 5 4(S-4), *CL501A -[4] DVD Unit 2, 5 4(S-5), *CN1601,*CN1602 -[5] DVD MainCBA Unit2, 4,5(S-6), (S-7), 2(S-8),2(S-9), *CN201,*CN301,Loader Shield Top22-12-22-32-43[6] DVDMechanism2, 4,5(S-10),Loader Shield Bottom 2[7] Sub CBA 2, 5 6(S-11), *CN301,*CN602 -[1] Rear Cabinet[3] CRT[2] Tray Chassis Unit[4] DVD Unit[5] DVD MainCBA Unit[6] DVDMechanism[7] Sub CBA[9] Deck Assembly[10] Main CBA[8] Function CBA[8] FunctionCBA 2, 5 2(S-12), *CN803 -[9] DeckAssembly 2, 53(S-13), 7(S-14),(S-15), (S-16),Top Shield, *CL201,*CL401, *CL402,*CL4034[10] Main CBA 2 5(S-17) -↓(1)↓(2)↓(3)↓(4)↓(5)ID/LOC.No.PARTREMOVALFig.No.REMOVE/*UNHOOK/UNLOCK/RELEASE/UNPLUG/DESOLDERNote