Magnavox 19MDTR20 Service Manual

Also see for 19MDTR17: Features

Contents

1-8-1 T1102INTHOW TO INITIALIZE THE TV/DVD/VCRTo put the program back at the factory-default, initialize the TV/DVD/VCR as the following procedure.< DVD Section >1. Turn the power on and press [SELECT] button onthe remote control unit to put the TV/DVD/VCRinto DVD mode.2. Press [1], [2], [3], [4], and [DISPLAY] buttons onthe remote control unit in that order.Fig. a appears on the screen.3. Press [CLEAR] button on the remote control unit.Fig. b appears on the screen.When “OK” appears on the screen, the factorydefault will be set.4. To exit this mode, press [CH. o / p] or [SELECT]button to go to TV mode, or press [STANDBY-ON]button to turn the power off.< TV/VCR Section >1. Use the service remote control unit.2. Turn the power on. (Use main power on the TVunit.)3. Press [DISC MENU] button on the service remotecontrol unit to enter the Service mode. (Refer to“How to Set up the Service mode” on page 1-7-1.)4. Press [VOL p] button on the service remotecontrol unit twice, and confirm that OSD indicationis “7F = FF.” If needed, set it to become “7F = FF”by pressing [CH. o / p] buttons on the serviceremote control unit.5. Confirm that OSD indication on the four cornerson TV screen changes from on and off lightindication to red by pressing a [DISPLAY] button.(It is necessary for one or two seconds.)6. Turn the power off by pressing main power buttonon the TV unit, and unplug the AC cord from theAC outlet.MODEL : *******Version : *.**Region : *EXIT: SELECTEEPROM CLEAR : CLEARFig. a"*******" differ depending on the models.MODEL : *******Version : *.**Region : *EEPROM CLEAR : OKEXIT: SELECTEEPROM CLEAR : CLEAR"*******" differ depending on the models.Fig. b