Makita DLS713 Instruction Manual

Also see for DLS713: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

Contents

2ENGLISH (Original instructions)SPECIFICATIONSModel DLS713Blade diameter 190 mm (7-1/2")Hole (arbor) diameter 15.88 mm (5/8")Max. Miter angle Left 47°, Right 57°Max. Bevel angle Left 45°, Right 5°Max. Cutting capacities (H x W) with blade 190 mm (7-1/2") in diameter.Bevel angleMiter angle 45° (left) 0° 5° (right)25 mm x 300 mm 52 mm x 300 mm 40 mm x 300 mm(1" x 11 - 3/4") (2 - 1/16" x 11 - 3/4") (1 - 9/16" x 11 - 3/4")* 60 mm x 265 mm (Note 1)0°----- (2-3/8" x 10-3/8") -----25 mm x 212 mm 52 mm x 212 mm(1" x 8 - 3/8") (2 - 1/16" x 8 - 3/8") -----* 60 mm x 185 mm (Note 2)45° (left and right)----- (2-3/8" x 7-1/4") -----52 mm x 163 mm----- (2 - 1/16" x 6 - 3/8") -----* 60 mm x 145 mm (Note 3)57° (right)----- (2-3/8" x 5-3/4") -----No load speed (RPM) 2,200 /minDimensions (L x W x H) 655 mm x 430 mm x 454 mm (25-3/4" x 17" x 17-7/8")Net weight (with battery BL1815N / BL1820 / BL1820B) 12.1 kg (26.7 lbs)Net weight (with battery BL1830 / BL1840 / BL1840B / BL1850 / BL1850B) 12.4 kg (27.3 lbs)Rated voltage D.C. 18 VStandard battery cartridge BL1815N / BL1820 / BL1820B / BL1830 / BL1840 / BL1840B / BL1850 / BL1850B(Note)* mark indicates that a wood facing with the following thickness is used.1: When using a wood facing 20 mm thickness2: When using a wood facing 15 mm thickness3: When using a wood facing 10 mm thickness• Due to our continuing program of research and development, the specifications herein are subject to change without notice.• Specifications and battery cartridge may differ from country to country.• Weight, with battery cartridge, according to EPTA-Procedure 01/2003USA005-3For Your Own Safety ReadInstruction ManualBefore Operating ToolSave it for future referenceGENERAL SAFETYPRECAUTIONS(For All Tools)1. KNOW YOUR POWER TOOL. Read the owner'smanual carefully. Learn the tool's applicationsand limitations, as well as the specificpotential hazards peculiar to it.2. KEEP GUARDS IN PLACE and in working order.3. REMOVE ADJUSTING KEYS AND WRENCHES.Form habit of checking to see that keys andadjusting wrenches are removed from toolbefore turning it on.4. KEEP WORK AREA CLEAN. Cluttered areasand benches invite accidents.