Makita DLS713 Instruction Manual

Also see for DLS713: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

Contents

35. DO NOT USE IN DANGEROUS ENVIRONMENT.Do not use power tools in damp or wetlocations, or expose them to rain. Keep workarea well lighted. Do not use tool in presenceof flammable liquids or gases.6. KEEP CHILDREN AWAY. All visitors should bekept safe distance from work area.7. MAKE WORKSHOP KID PROOF with padlocks,master switches, or by removing starter keys.8. DO NOT FORCE TOOL. It will do the job betterand safer at the rate for which it was designed.9. USE RIGHT TOOL. Do not force tool or attachmentto do a job for which it was not designed.10. WEAR PROPER APPAREL. Do not wear looseclothing, gloves, neckties, rings, bracelets, orother jewelry which may get caught in movingparts. Nonslip footwear is recommended. Wearprotective hair covering to contain long hair.11. ALWAYS USE SAFETY GLASSES. Also useface or dust mask if cutting operation is dusty.Everyday eyeglasses only have impactresistant lenses, they are NOT safety glasses.12. SECURE WORK. Use clamps or a vise to holdwork when practical. It's safer than using yourhand and it frees both hands to operate tool.13. DO NOT OVERREACH. Keep proper footingand balance at all times.14. MAINTAIN TOOLS WITH CARE. Keep toolssharp and clean for best and safestperformance. Follow instructions forlubricating and changing accessories.15. DISCONNECT BATTERY FROM TOOL beforeservicing; when changing accessories suchas blades, bits, cutters, and the like.16. REDUCE THE RISK OF UNINTENTIONALSTARTING. Make sure switch is in off positionbefore inserting battery.17. USE RECOMMENDED ACCESSORIES.Consult the owner's manual for recommendedaccessories. The use of improper accessoriesmay cause risk of injury to persons.18. NEVER STAND ON TOOL. Serious injury couldoccur if the tool is tipped or if the cutting toolis unintentionally contacted.19. CHECK DAMAGED PARTS. Before further useof the tool, a guard or other part that isdamaged should be carefully checked todetermine that it will operate properly andperform its intended function - check foralignment of moving parts, binding of movingparts, breakage of parts, mounting, and anyother conditions that may affect its operation.A guard or other part that is damaged shouldbe properly repaired or replaced.20. DIRECTION OF FEED. Feed work into a bladeor cutter against the direction of rotation of theblade or cutter only.21. NEVER LEAVE TOOL RUNNING UNATTENDED.TURN POWER OFF. Do not leave tool until itcomes to a complete stop.22. Ensure the switch is in the off position beforeinserting battery cartridge. Inserting the batterycartridge into power tools that have the switch oninvites accidents.23. Recharge only with the charger specified bythe manufacturer. A charger that is suitable forone type of battery cartridge may create a risk offire when used with another battery cartridge.24. Use power tools only with specificallydesignated battery cartridges. Use of any otherbattery cartridges may create a risk of injury and fire25. When battery cartridge is not in use, keep itaway from other metal objects like paper clips,coins, keys, nails, screws, or other small metalobjects that can make a connection from oneterminal to another. Shorting the batteryterminals together may cause burns or a fire.26. Under abusive conditions, liquid may beejected from the battery; avoid contact. Ifcontact accidentally occurs, flush with water. Ifliquid contacts eyes, additionally seek medicalhelp. Liquid ejected from the battery may causeirritation or burns.27. Disconnect battery cartridge from tool or placethe switch in the locked or off position beforemaking any adjustments, changing accessories,or storing the tool. Such preventive safety measuresreduce the risk of starting the tool accidentally.28. Have your power tool serviced by a qualifiedrepair person using only identical replacementparts. This will ensure that the safety of the powertool is maintained. USB033-3ADDITIONAL SAFETY RULESDO NOT let comfort or familiarity with product (gainedfrom repeated use) replace strict adherence to slidecompound saw safety rules. If you use this tool unsafelyor incorrectly, you can suffer serious personal injury.1. Wear eye protection.2. Keep hands out of path of saw blade. Avoidcontact with any coasting blade. It can stillcause severe injury.3. Do not operate saw without guards in place.Check blade guard for proper closing before eachuse. Do not operate saw if blade guard does notmove freely and close instantly. Never clamp or tiethe blade guard into the open position.