Makita DLS713 Instruction Manual

Also see for DLS713: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

Contents

10Switch actionFor European countries123 4011266To prevent the switch trigger from being accidentallypulled, a lock-off button is provided. To start the tool,push the lever up, press in the lock-off button and thenpull the switch trigger. Release the switch trigger to stop.WARNING:• Before installing the battery cartridge on thetool, always check to see that the switch triggeractuates properly and returns to the "OFF"position when released. Do not pull the switchtrigger hard without pressing in the lock-offbutton. This can cause switch breakage.Operating a tool with a switch that does not actuateproperly can lead to loss of control and seriouspersonal injury.A hole is provided in the switch trigger for insertion of apadlock to lock the tool off.For all countries other than European countries123011243To prevent the switch trigger from being accidentallypulled, a lock-off button is provided. To start the tool,press in the lock-off button and pull the switch trigger.Release the switch trigger to stop.WARNING:• Before installing the battery cartridge on thetool, always check to see that the switch triggeractuates properly and returns to the "OFF"position when released. Do not pull the switchtrigger hard without pressing in the lock-offbutton. This can cause switch breakage.Operating a tool with a switch that does not actuateproperly can lead to loss of control and seriouspersonal injury.A hole is provided in the switch trigger for insertion of apadlock to lock the tool off.WARNING:• Do not use a lock with a shank or cable anysmaller than 6.35 mm (1/4") in diameter. Asmaller shank or cable may not properly lock thetool in the off position and unintentional operationmay occur resulting in serious personal injury.• NEVER use tool without a fully operativeswitch trigger. Any tool with an inoperative switchis HIGHLY DANGEROUS and must be repairedbefore further usage or serious personal injury mayoccur.• For your safety, this tool is equipped with a lock-offbutton which prevents the tool from unintendedstarting. NEVER use the tool if it runs when yousimply pull the switch trigger without pressing thelock-off button. A switch in need of repair may resultin unintentional operation and serious personalinjury. Return tool to a Makita service center forproper repairs BEFORE further usage.• NEVER defeat the lock-off button by taping down orsome other means. A switch with a defeatedlock-off button may result in unintentional operationand serious personal injury.ASSEMBLYWARNING:• Always be sure that the tool is switched off andthe battery cartridge is removed beforeworking on the tool. Failure to switch off andremove the battery cartridge may result in seriouspersonal injury.Hex wrench storage1 2012595The hex wrench is stored as shown in the figure. Whenthe hex wrench is needed it can be pulled out of thewrench holder. After using the hex wrench it can bestored by returning it to the wrench holder.1. Wrench holder2. Hex wrench1. Lock-off button2. Switch trigger3. Hole for padlock1. Lever2. Switch trigger3. Lock-off button4. Hole for padlock