Makita DLS713 Instruction Manual

Also see for DLS713: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

Contents

19(2) 45° bevel angle1012590Adjust the 45° bevel angle only afterperforming 0° bevel angle adjustment. Toadjust left 45° bevel angle, loosen the leverand tilt the blade to the left fully. Make surethat the pointer on the arm points to 45° onthe bevel scale on the arm holder. If thepointer does not point to 45°, turn the 45°bevel angle adjusting bolt (upper bolt) on theright side of the arm until the pointer points to45°.Replacing carbon brushes1001145Remove and check the carbon brushes regularly.Replace when they wear down to the limit mark. Keepthe carbon brushes clean and free to slip in the holders.Both carbon brushes should be replaced at the sametime. Use only identical carbon brushes.12011307Use a screwdriver to remove the brush holder caps. Takeout the worn carbon brushes, insert the new ones andsecure the brush holder caps.After use• After use, wipe off chips and dust adhering to thetool with a cloth or the like. Keep the blade guardclean according to the directions in the previouslycovered section titled "Blade guard". Lubricate thesliding portions with machine oil to prevent rust.• When storing the tool, pull the carriage toward youfully so that the slide pole is thoroughly inserted intothe turn base.To maintain product SAFETY and RELIABILITY, repairs,any other maintenance or adjustment should beperformed by Makita Authorized Service Centers, alwaysusing Makita replacement parts.OPTIONAL ACCESSORIESWARNING:• These Makita accessories or attachments arerecommended for use with your Makita toolspecified in this manual. The use of any otheraccessories or attachments may result in seriouspersonal injury.• Only use the Makita accessory or attachmentfor its stated purpose. Misuse of an accessory orattachment may result in serious personal injury.If you need any assistance for more details regardingthese accessories, ask your local Makita Service Center.• Carbide-tipped saw blades• Vise assembly (Horizontal vise)• Vertical vise• Holder set• Holder assembly• Holder rod assembly• Set plate• Dust bag• Triangular rule• Hex wrench• Various type of Makita genuine batteries andchargersNOTE:• Some items in the list may be included in the toolpackage as standard accessories. They may differfrom country to country.1. Brush holder cap2. Screwdriver1. Limit mark1. Left 45 ﾟ bevelangle adjustingbolt

/ 20

Related manuals for Makita DLS713