Makita DLS713 Instruction Manual

Also see for DLS713: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

Contents

63. Charge the battery cartridge with room temperatureat 10 ﾟ C - 40 ﾟ C (50 ﾟ F - 104 ﾟ F). Let a hot batterycartridge cool down before charging it.4. Charge the battery cartridge once in every sixmonths if you do not use it for a long period of time.INSTALLATIONBench mounting1011300When the tool is shipped, the handle is locked in thelowered position by the stopper pin. Release the stopperpin by simultaneously applying a slight downwardpressure on the handle and pulling the stopper pin.WARNING:• Ensure that the tool will not move on thesupporting surface. Movement of the miter sawon the supporting surface while cutting may resultin loss of control and serious personal injury.1011236This tool should be bolted with two bolts to a level andstable surface using the bolt holes provided in the tool'sbase. This will help prevent tipping and possible injury.1011237Turn the adjusting bolt clockwise or counterclockwise sothat it comes into a contact with the floor surface to keepthe tool stable.FUNCTIONAL DESCRIPTIONWARNING:• Always be sure that the tool is switched off andthe battery cartridge is removed beforeadjusting or checking the functions on the tool.Failure to switch off and remove the batterycartridge may result in serious personal injury fromaccidental start-up.Installing or removing battery cartridge123011235• Always switch off the tool before insertion orremoval of the battery cartridge.• To remove the battery cartridge, withdraw it from thetool while sliding the button on the front of the cartridge.• To insert the battery cartridge, align the tongue on thebattery cartridge with the groove in the housing and slipit into place. Always insert it all the way until it locks inplace with a little click. If you can see the red part on theupper side of the button, it is not locked completely.Insert it fully until the red part cannot be seen. If not, itmay accidentally fall out of the tool, causing injury toyou or someone around you.• Do not use force when inserting the batterycartridge. If the cartridge does not slide in easily, itis not being inserted correctly.Battery protection system(Lithium-ion battery with star marking)1012128Lithium-ion batteries with a star marking are equippedwith a protection system. This system automatically cutsoff power to the tool to extend battery life.The tool will automatically stop during operation if the tooland/or battery are placed under one of the followingconditions:1. Star marking1. Red part2. Button3. Battery cartridge1. Adjusting bolt1. Bolt1. Stopper pin